# of Displayed Technologies: 10 / 377


Categories

Ultra-high-throughput sequencing approach enabling whole-community COVID-19 screening
TS-050647 — REMBRANDT: a high-throughput Next Generation Sequencing-based approach for the simultaneous screening of over 100,000 COVID-19 samples per day.
The Need The SARS-CoV-2 virus, which causes COVID-19 syndrome, has rapidly spread throughout the world and was recently classified by the WHO as a pandemic pathogen. Severe disease that requires hospital admission occurs in 20% of cases, and a subset of these patients require ICU care; the death ra…
  • College: College of Medicine (COM)
  • Inventors: Palmieri, Dario; Fishel, Richard; Miles, Wayne; Siddiqui, Jalal "Jalal"
  • Licensing Officer: Ezzell, Janel

Method of forming low turn on and high breakdown voltage lateral diode.
TS-050626 — A hybrid Schottky and metal/high K dielectric/semiconductor contact to realize higher breakdown and low turn-on voltage for lateral diode based on wide bandgap semiconductors.
Practical realization of high breakdown fields in wide bandgap semiconductors such as GaN, SiC, typically requires the use of p-n junction, which require a turn-on voltage comparable to the bandgap of these semiconductors. For lower voltage applications, the forward or ON-state power loss due to h…
  • College: College of Engineering (COE)
  • Inventors: Rahman, Mohammad Wahidur "Wahidur"; Rajan, Siddharth
  • Licensing Officer: Hong, Dongsung

Method for selective area doping of Gallium Nitride
TS-050625 — A method of selectively obtaining n- and p-type regions from the same III-Nitride layer deposited on a substrate without using diffusion or ion-implantation techniques.
According to IBIS World Reports, manufacturers of electronic components will likely refocus their production away from silicon-based products to wide bandgap (WBG) semiconductors, which are made of materials that have a wider bandgap than silicon. A bandgap, or energy gap, denotes the energy diffe…
  • College: College of Engineering (COE)
  • Inventors: Rajan, Siddharth; Chandrasekar, Hareesh; Rahman, Mohammad Wahidur "Wahidur"
  • Licensing Officer: Hong, Dongsung

Novel acellular vaccine for protection against Bordetella infection
TS-050524 — Despite high vaccine coverage, whooping cough caused by Bordetella pertussis remains one of the most common vaccine-preventable diseases worldwide. Introduction of whole-cell pertussis (wP) vaccines in the 1940s and acellular pertussis (aP) vaccines in 1990s reduced mortality due to pertussis. Des…
  • College: College of Medicine (COM)
  • Inventors: Deora, Rajendar; Mishra, Meenu; Sukumar, Neelima
  • Licensing Officer: Ezzell, Janel

Method for seamless joining and repair of metal parts using ultrasonic additive manufacturing
TS-050479 — This invention provides a method for repairing metal parts by removing and replacing worn, damaged, or defective metal material. It also serves as a method for seamlessly joining metal sheets and other parts while retaining the original temper of the joined parts. This technology, based on ultrasonic additive manufacturing (UAM), achieves strong joints and repairs by enabling the filling of a channel that has been cut, formed, or otherwise created in a metal structure or between two metal structures.
The aircraft industry lacks a robust method for joining metal sheets, structures, and assemblies together in wings, fuselages, and engines. Fusion based welding methods cannot always be used because they create heat-affected zones, which reduce the mechanical performance of material around the wel…
  • College: College of Engineering (COE)
  • Inventors: Dapino, Marcelo; Gingerich, Mark; Headings, Leon
  • Licensing Officer: Zinn, Ryan

Out-of-Plane Fluidic Actuator for Curved Surface Applications
TS-050464 — A novel bistable fluidic actuator design which uses naturally occurring fluid dynamic instabilities instead of moving parts to create an oscillating jet that is out-of-plane from the fluid inlet port.
Turbines are used to produce much of the world’s electricity, whether it be from nuclear, coal, or natural gas sources, as well as provide power for the vast majority of aircraft flying today. For many turbine applications, the first stage vane and blade just downstream of the combustor is a…
  • College: College of Engineering (COE)
  • Inventors: Hossain, Mohammad Arif "Arif"; Ameri, Ali; Bons, Jeffrey; Gregory, James "Jim"
  • Licensing Officer: Zinn, Ryan

Out-of-Plane Fluidic Actuator for Curved Surface Applications
TS-050464 — A novel bistable fluidic actuator design which uses naturally occurring fluid dynamic instabilities instead of moving parts to create an oscillating jet that is out-of-plane from the fluid inlet port.
Turbines are used to produce much of the world’s electricity, whether it be from nuclear, coal, or natural gas sources, as well as provide power for the vast majority of aircraft flying today. For many turbine applications, the first stage vane and blade just downstream of the combustor is a…
  • College: College of Engineering (COE)
  • Inventors: Hossain, Mohammad Arif "Arif"; Ameri, Ali; Bons, Jeffrey; Gregory, James "Jim"
  • Licensing Officer: Zinn, Ryan

Mini-PCDH15 for treatment of deafness
TS-050433 — A gene therapy solution for Usher Syndrome Type 1F.
Mutations in PCDH15 cause Usher 1F, a recessive syndrome characterized by profound congenital deafness and absence of vestibular function, and progressive blindness beginning in the second decade. Because patients who lack hearing and balance rely on vision for communication and mobility, the late…
  • College: College of Arts & Sciences
  • Inventors: Sotomayor, Marcos
  • Licensing Officer: Ezzell, Janel

Smart Platform for Engineered Electroceutical Dressings (SPEEDs) Enables Better Wound Care
TS-050245 — An integrated platform with multiple sensing modalities to actively orchestrate antimicrobial activity and wound healing.
Wound healing and disinfection for chronic wounds presents significant hurdles within the medical industry. Current state of art is inadequate and adds a significant cost burden to the healthcare system with many health and life-quality challenges for patients. After the formation of an open wound…
  • College: College of Engineering (COE)
  • Inventors: Prakash, Shaurya; Heald, Rachel; Mohana Sundaram, Prashanth; Narayanan, Kavya; Stoodley, Paul; Subramaniam, Vishwanath; Vilku, Gurleen; Wilgus, Traci; Wozniak, Daniel
  • Licensing Officer: Hong, Dongsung

Scalable laser-assisted MOCVD chamber design with laser array input
TS-050244 — A design of scalable laser-assisted MOCVD chamber for III-nitrides and other semiconductors with a laser array input.
III-nitrides represent an important semiconductor material system for both optoelectronic and power electronic device applications. Advantages for III-nitrides include high electron saturation velocity, high critical electric field, high radiation resistance and decent thermal performance. Therefo…
  • College: College of Engineering (COE)
  • Inventors: Zhao, Hongping; Chen, Zhaoying
  • Licensing Officer: Hong, Dongsung

Show More Technologies

Loading icon