# of Displayed Technologies: 3 / 3

Applied Category Filter (Click To Remove): Welding


Categories

Enhancing the mechanical performance of resistance spot welding of aluminum alloys to steel using chromium-rich Interlayers
TS-054040 — This is a new method of resistance spot welding of aluminum alloy and advanced high strength steel that creates a stronger bond by using a chromium-rich interlayer. The interlayer improves joint strength, ductility, and toughness compared to traditional methods.
Resistance welding is used to combine two metals at one point. This technique is used extensively in automotive manufacturing, combining an aluminum (Al) to an advanced high strength steel (AHSS) structure. Welding Al and AHSS together directly, however, does not create a high-quality bond, due to…
  • College: College of Engineering (COE)
  • Inventors: Ramirez, Antonio; Lara, Bryan; Reghine Giorjao, Rafael Arthur
  • Licensing Officer: Zinn, Ryan

U+RSW - A Break-Through Process for Dissimilar Metal Joining in Automotive Industries
TS-036907 — A welding technique that joins two dissimilar metals.
Resistance spot welding (RSW) is critical to automobile manufacturing, with 3,000 to 5,000 spot welds per vehicle. As consumers seek vehicles with better fuel economy, automobile manufacturers have replaced parts built from heavy metals, such as advanced high-strength steel (AHSS), with lighter al…
  • College: College of Engineering (COE)
  • Inventors: Zhang, Wei; Kimchi, Menachem; Lu, Ying "ying"; Mayton, Ellis
  • Licensing Officer: Zinn, Ryan

Method and Device to Monitor & Control Efficiency of the Friction Welding Process
TS-015293 — A device that can be readily attached to inertia or direct drive friction welding equipment to determine energy efficiency in-situ during welding, providing real-time feedback for improving control.
Friction welding is a category of solid-state welding processes that uses frictional heat generation at the weld interface to plasticize the work pieces and produce a metallurgical bond. The welding parameters used in large-scale industrial production are typically determined via trial and error. …
  • College: College of Engineering (COE)
  • Inventors: Zhang, Wei; Mahaffey, David; Semiatin, Sheldon; Senkov, Oleg; Tung, Daniel
  • Licensing Officer: Zinn, Ryan

Loading icon