# of Displayed Technologies: 10 / 24

Applied Category Filter (Click To Remove): Medical Devices


Categories

X-Ray Assistive Device for Standardizing the Knee Templating Process
TS-054471 — Knee templating is used as part of the pre-operative planning for knee replacement to determine the best fit for an implant. The current assistive devices used to determine fit are unreliable and inaccurate for proper patient fit. A new device is suggested to overcome these limitations.
Over 600,000 knee replacements are performed per year. As part of the pre-operative planning for surgery, x-ray images are taken to determine the proper fit for the implant. Even with the use of a calibration ball, this knee templating procedure remains inaccurate and unreliable for a number of re…
  • College: College of Engineering (COE)
  • Inventors: Ruegsegger, Mark; Aery, Dylan; Browske, Kimberly; Cantrell, Kaleb "Kaleb"; Reilman, Zach; Thew, Maddie
  • Licensing Officer: Zinn, Ryan

Novel Ergonomic Scalpel Handle
TS-051663 — Alleviate and prevent occupational stresses using this novel scalpel design.
A highly unfortunate outcome of the 2020 coronavirus pandemic is the over 400,000 American deaths that have unexpectedly overloaded medical autopsy services across the United States. With this heightened need for autopsy services previously unseen occupational hazards relating to repetitive motion…
  • College: College of Medicine (COM)
  • Inventors: Sachire, Jennifer
  • Licensing Officer: He, Panqing

Smart Platform for Engineered Electroceutical Dressings (SPEEDs) Enables Better Wound Care
TS-050245 — An integrated platform with multiple sensing modalities to actively orchestrate antimicrobial activity and wound healing.
Wound healing and disinfection for chronic wounds presents significant hurdles within the medical industry. Current state of art is inadequate and adds a significant cost burden to the healthcare system with many health and life-quality challenges for patients. After the formation of an open wound…
  • College: College of Engineering (COE)
  • Inventors: Prakash, Shaurya; Heald, Rachel; Mohana Sundaram, Prashanth; Narayanan, Kavya; Stoodley, Paul; Subramaniam, Vishwanath; Vilku, Gurleen; Wilgus, Traci; Wozniak, Daniel
  • Licensing Officer: Hong, Dongsung

Gas Sensors for Health Monitoring and Diagnostics
TS-047136 — A range of low-cost gas sensors for non-invasive diagnostic tests and health monitoring.
Exhaled human breath is a combination of hundreds of gases including inorganic molecules such as NO, NH3 or CO, and volatile organic molecules such as acetone, ethane, and isoprene. Some of these gases are produced by the body as the result of physiological processes. Known as ‘biomarkers&rs…
  • College: College of Engineering (COE)
  • Inventors: Gouma, Pelagia-Iren
  • Licensing Officer: Gooray, Arthur "Art"

ReScribe: Transcription factors for reprogramming of diseased musculoskeletal related cells
TS-046978 — Transcription factors that can upregulate desired genes in diseased tissue to reprogram diseased cells, thereby reversing the disease and creating healthy non-diseased phenotype genes. These transcription factors would be especially useful in musculoskeletal diseases such as back pain and osteoarthritis.
Musculoskeletal diseases including osteoarthritis and chronic low back pain, are debilitating, painful, and often difficult to treat. Intervertebral disc (IVD) degeneration, as an example, is strongly associated with low back pain, a leading cause of disability worldwide. According to the American…
  • College: College of Engineering (COE)
  • Inventors: Walter, Devina; Gallego Perez, Daniel; Higuita Castro, Natalia; Hoyland, Judith; Khan, Safdar; Tang, Shirley "Shirley Nina"; Walter, Benjamin
  • Licensing Officer: Norris, Francis "Frank"

Folding Transducer Array for Compact and Deployable Wave-Energy Guiding System
TS-043186 — A novel acoustic/ultrasonic wave-energy guiding system that utilizes structural topology to enhance directional and spectral sensitivities instead of phase delay, offering exceptional versatility and adaptable performance.
Although acoustic beamforming systems that are based on phase delays can be used to enhance directional and spectral sensitivities, each source or receiver must be individually controlled by appropriate phase delays to guide the acoustic energy radiation/reception sensitivities. This results in a …
  • College: College of Engineering (COE)
  • Inventors: Harne, Ryan
  • Licensing Officer: Norris, Francis "Frank"

Folding Transducer Array for Compact and Deployable Wave-Energy Guiding System
TS-043186 — A novel acoustic/ultrasonic wave-energy guiding system that utilizes structural topology to enhance directional and spectral sensitivities instead of phase delay, offering exceptional versatility and adaptable performance.
Although acoustic beamforming systems that are based on phase delays can be used to enhance directional and spectral sensitivities, each source or receiver must be individually controlled by appropriate phase delays to guide the acoustic energy radiation/reception sensitivities. This results in a …
  • College: College of Engineering (COE)
  • Inventors: Harne, Ryan
  • Licensing Officer: Norris, Francis "Frank"

High-strength and Corrosion Resistant Alloy for Patient-Specific Bioresorbable Bone Fixation Hardware
TS-042526 — Novel ternary and quaternary Mg-Zn-Ca-based alloys and a heat treatment process for producing bioresorbable bone fixation implants with improved mechanical and corrosion properties
Mg-Zn-Ca-based alloys are the most promising alloy system for bone implant applications mainly due to their superior biocompatibility. For fixation applications, the ideal is a material strong enough to hold while healing (2-4 months) yet being fully resorbed after the bones have healed (6-24 mont…
  • College: College of Medicine (COM)
  • Inventors: Dean, David; Elahinia, Mohammad; Ibrahim, Hamdy
  • Licensing Officer: Norris, Francis "Frank"

Machine-Learning Algorithm for Improved Speech Intelligibility in Noise
TS-042266 — A monaural machine-learning algorithm for classifying time-frequency units in an unknown signal, which results in marked speech-intelligibly improvements in noisy signals.
A primary complaint of hearing-impaired (HI) listeners is poor speech recognition in background noise. This issue can be quite debilitating and persists despite considerable efforts to improve hearing technology. Despite considerable effort, monaural (single-microphone) algorithms capable of incre…
  • College: College of Arts & Sciences
  • Inventors: Healy, Eric; Vasko, Jordan
  • Licensing Officer: Hong, Dongsung

Machine-Learning Algorithm for Improved Speech Intelligibility in Noise
TS-042266 — A monaural machine-learning algorithm for classifying time-frequency units in an unknown signal, which results in marked speech-intelligibly improvements in noisy signals.
A primary complaint of hearing-impaired (HI) listeners is poor speech recognition in background noise. This issue can be quite debilitating and persists despite considerable efforts to improve hearing technology. Despite considerable effort, monaural (single-microphone) algorithms capable of incre…
  • College: College of Arts & Sciences
  • Inventors: Healy, Eric; Vasko, Jordan
  • Licensing Officer: Hong, Dongsung

Show More Technologies

Loading icon