# of Displayed Technologies: 10 / 16

Applied Category Filter (Click To Remove): Other


Categories

Sacrificial Layer to Facilitate Welding of Thin Foils
TS-065430 — Cost-effective method to prevent damaged electrodes when welding thin foils.
Manufacturing of automotive lithium-ion batteries and battery packs is attracting growing attention with the driving demands of electric vehicles. During battery assembly, multi-layers of metal films, functioning as anodes, cathodes, or bus-bars are welded together. Achieving satisfying weld quali…
  • College: College of Engineering (COE)
  • Inventors: Liu, Xun; Kwon, Ho; Shah, Umair
  • Licensing Officer: Zinn, Ryan

Streamlined Die Design Approach for Friction Stir Extrusion
TS-065428 — The Ohio State University researchers led by Dr. Rajiv Shivpuri have developed a die design approach for friction stir extrusion that optimizes metal flow to improve production efficiencies.
Friction stir extrusion (FSE) is a variation of friction stir processing that enables the hot extrusion of metal profiles from billet or other precursor material without preheating. This process saves significant thermal energy over conventional metal extrusion processes and can impart favorable …
  • College: College of Engineering (COE)
  • Inventors: Shivpuri, Rajiv
  • Licensing Officer: Zinn, Ryan

Self-filling Friction Stir Welding Processing
TS-065427 — The Ohio State University has developed a novel self-filling friction stir welding tool that eliminates keyhole defects caused by tool pin retraction.
Friction stir welding (FSW) and friction stir processing (FSP) are solid-state processes that utilize the heat generated from a rotating pin tool to soften the base metals for fusion and repair, respectively. However, keyhole defects are inevitably left after retracting the tool pin, which can ge…
  • College: College of Engineering (COE)
  • Inventors: Liu, Xun
  • Licensing Officer: Zinn, Ryan

Containment System for Heating and Off-Gassing
TS-065424 — Due to environmental concerns and the decreasing supply of fossil fuels, there is substantial demand for nuclear-based energy production. Nuclear energy now provides about 10% of the world's electricity from about 440 power reactors and is the second largest source of low-carbon power. In addition, over 50 smaller countries utilize nuclear energy in about 220 research-size reactors. These reactors are used to produce medical and industrial isotopes and several other purposes.
It is essential to meet the safeguard requirements in liquid-fueled molten salt reactors, fuel salt transportation, and fuel cycle processes and to develop effective methods for measuring and monitoring the mass of molten fuel salt or coolant salt. However, due to the complex and dynamic nature o…
  • College: College of Engineering (COE)
  • Inventors: Van Zile, Matthew; Cao, Lei Raymond; Kauffman, Andrew
  • Licensing Officer: Zinn, Ryan

Co-Axial Contained Electrospray Ionization Platform for Mass Spec.
TS-064299 — Mass spectrometry (MS) is used across a wide range of applications involving analytical chemistry. Various MS techniques, often coupled with liquid chromatography (LC), allow for detection of various chemical analytes, from drug metabolites, pesticides, food adulterants, and natural product extracts…
  • College: College of Arts & Sciences
  • Inventors: Badu-Tawiah, Abraham; Burris, Benjamin "Ben"; Grooms, Alex; Heiss, Derik; Kulyk, Dmytro
  • Licensing Officer: Willson, Christopher

Part 3 of 3: Fluidic Oscillators with Three-Dimensional Output
TS-063372 — Embark on a new era of fluidic control with our state-of-the-art three-dimensional fluidic oscillator technology. Experience precision, versatility, and efficiency like never before. Stay ahead of the curve and revolutionize your industry with our innovative solution. This inventive design is 1 of 3 aspects of technology T2019-309 and is just one part of a larger, comprehensive suite of fluidic oscillator technologies offered by The Ohio State University for licensing. To learn more about our other designs, please visit https://oied.osu.edu/find-technologies and search using the term: Fluidic Oscillator. To see a descriptive YouTube video of this technology, please visit: https://www.youtube.com/watch?v=g2Hn2q5W958.
In the realm of fluidic devices, the demand for a three-dimensional oscillating fluid stream has been a persistent challenge. Conventional fluidic oscillators, while efficient, produce a limited two-dimensional output. There is a critical commercial need for a fluidic oscillator that can break fre…
  • College: College of Engineering (COE)
  • Inventors: Tomac, Mehmet
  • Licensing Officer: Zinn, Ryan

Part 2 of 3: Fluidic Oscillators with Atomized Output
TS-063369 — Experience the future of atomization technology with our feedback type fluidic oscillator device with atomized output. Unlock unparalleled precision and efficiency in fluid dispersion, revolutionizing industries and setting new standards for atomized spray applications. This inventive design is 1 of 3 aspects of technology T2019-309 and is just one part of a larger, comprehensive suite of fluidic oscillator technologies offered by The Ohio State University for licensing. To learn more about our other designs, please visit https://oied.osu.edu/find-technologies and search using the term: Fluidic Oscillator. To see a descriptive YouTube video of this technology, please visit: https://www.youtube.com/watch?v=g2Hn2q5W958.
In the realm of fluid dynamics, there is a pressing commercial need for atomizing devices that can produce fine particles in all three dimensions. Current atomizers are limited, primarily offering two-dimensional sprays with little dispersion in the third dimension. Industries spanning from fuel i…
  • College: College of Engineering (COE)
  • Inventors: Tomac, Mehmet
  • Licensing Officer: Zinn, Ryan

Part 1 of 3: Fluidic Oscillators with Sweeping Jets and Multidirectional Output
TS-063350 — Experience the future of fluidic control—our sweeping jet device with multidirectional output sets a new standard in precision fluid distribution, offering reliability, efficiency, and innovation for diverse industrial applications. This inventive design is 1 of 3 aspects of technology T2019-309 and is just one part of a larger, comprehensive suite of fluidic oscillator technologies offered by The Ohio State University for licensing. To learn more about our other designs, please visit https://oied.osu.edu/find-technologies and search using the term: Fluidic Oscillator. To see a descriptive YouTube video of this technology, please visit: https://www.youtube.com/watch?v=g2Hn2q5W958.
In various industrial applications, the demand for versatile fluidic systems capable of delivering multidirectional sweeping outputs has become crucial. Traditional jet interaction-type fluidic oscillators, while efficient, face limitations when it comes to covering wide, multidirectional fields w…
  • College: College of Engineering (COE)
  • Inventors: Tomac, Mehmet
  • Licensing Officer: Zinn, Ryan

pH-sensitive inhibitor release system for corrosion protection
TS-062835 — Coatings are broadly used to protect metallic structures from corrosion. However, aggressive acidic and alkaline conditions can both develop locally on the coated metal surface due to corrosion, leading to the failure of the coated structure. Commonly used smart coatings use a timed release of spe…
  • College: College of Engineering (COE)
  • Inventors: Li, Chao; Frankel, Gerald "Jerry"; Guo, Xiaolei
  • Licensing Officer: Zinn, Ryan

Battery Discharge Simulator (Portfolio)
TS-061804 — A portfolio of technologies
The Need Battery design is becoming increasingly complex with the increased applications for electric vehicles and power storage for renewable energy such as solar and wind. Designers continue to pursue more efficient power designs with resilient characteristics to ensure long battery life over con…
  • College: College of Engineering (COE)
  • Inventors: Conlisk, Terrence "Terry"; Marcicki, James
  • Licensing Officer: Randhawa, Davinder

Show More Technologies

Loading icon