# of Displayed Technologies: 10 / 26

Applied Category Filter (Click To Remove): Medical Devices


Categories

Portable and automated mechanical ventilator with renewable energy source for harsh or remote environments
TS-048975 — A mechanical ventilation device which incorporates a hand-crank to enable automated breathing assistance without the need for electrical outlets or external generators.
Mechanical ventilators have been developed to provide automated, life-sustaining assistance to individuals with difficulty breathing due to either injury or chronic illness. Current ventilator systems, however, are expensive, require constant medical supervision and require reliable electrical pow…
  • College: OSU Wexner Medical Center
  • Inventors: Vazquez, Daniel; Haney, Amanda; Skidmore, Jeffrey
  • Licensing Officer: Zinn, Ryan

Integrated Biomanufacturing System for Fiber-Reinforced Tissue Composites
TS-047830 — An automated technique and system which combines electrospinning, additive manufacturing, and cell dispensing for generating high-quality tissue constructs with high physiological relevance.
Recent advances in biofabrication introduced by additive manufacturing/3D printing (AM/3DP) have significantly improved the overall architecture control in tissue engineered constructs. These constructs have a wide variety of important research and clinical applications including, but not limited …
  • College: College of Engineering (COE)
  • Inventors: Zhang, Xu; Herderick, Edward; Niu, Ye "Ye"; Zhao, Yi
  • Licensing Officer: Zinn, Ryan

Gas Sensors for Health Monitoring and Diagnostics
TS-047136 — A range of low-cost gas sensors for non-invasive diagnostic tests and health monitoring.
Exhaled human breath is a combination of hundreds of gases including inorganic molecules such as NO, NH3 or CO, and volatile organic molecules such as acetone, ethane, and isoprene. Some of these gases are produced by the body as the result of physiological processes. Known as ‘biomarkers&rs…
  • College: College of Engineering (COE)
  • Inventors: Gouma, Pelagia-Iren
  • Licensing Officer: Gooray, Arthur "Art"

ReScribe: Transcription factors for reprogramming of diseased musculoskeletal related cells
TS-046978 — Transcription factors that can upregulate desired genes in diseased tissue to reprogram diseased cells, thereby reversing the disease and creating healthy non-diseased phenotype genes. These transcription factors would be especially useful in musculoskeletal diseases such as back pain and osteoarthritis.
Musculoskeletal diseases including osteoarthritis and chronic low back pain, are debilitating, painful, and often difficult to treat. Intervertebral disc (IVD) degeneration, as an example, is strongly associated with low back pain, a leading cause of disability worldwide. According to the American…
  • College: College of Engineering (COE)
  • Inventors: Walter, Devina; Gallego Perez, Daniel; Higuita Castro, Natalia; Hoyland, Judith; Khan, Safdar; Tang, Shirley "Shirley Nina"; Walter, Benjamin
  • Licensing Officer: Norris, Francis "Frank"

Folding Transducer Array for Compact and Deployable Wave-Energy Guiding System
TS-043186 — A novel acoustic/ultrasonic wave-energy guiding system that utilizes structural topology to enhance directional and spectral sensitivities instead of phase delay, offering exceptional versatility and adaptable performance.
Although acoustic beamforming systems that are based on phase delays can be used to enhance directional and spectral sensitivities, each source or receiver must be individually controlled by appropriate phase delays to guide the acoustic energy radiation/reception sensitivities. This results in a …
  • College: College of Engineering (COE)
  • Inventors: Harne, Ryan
  • Licensing Officer: Norris, Francis "Frank"

Folding Transducer Array for Compact and Deployable Wave-Energy Guiding System
TS-043186 — A novel acoustic/ultrasonic wave-energy guiding system that utilizes structural topology to enhance directional and spectral sensitivities instead of phase delay, offering exceptional versatility and adaptable performance.
Although acoustic beamforming systems that are based on phase delays can be used to enhance directional and spectral sensitivities, each source or receiver must be individually controlled by appropriate phase delays to guide the acoustic energy radiation/reception sensitivities. This results in a …
  • College: College of Engineering (COE)
  • Inventors: Harne, Ryan
  • Licensing Officer: Norris, Francis "Frank"

High-strength and Corrosion Resistant Alloy for Patient-Specific Bioresorbable Bone Fixation Hardware
TS-042526 — Novel ternary and quaternary Mg-Zn-Ca-based alloys and a heat treatment process for producing bioresorbable bone fixation implants with improved mechanical and corrosion properties
Mg-Zn-Ca-based alloys are the most promising alloy system for bone implant applications mainly due to their superior biocompatibility. For fixation applications, the ideal is a material strong enough to hold while healing (2-4 months) yet being fully resorbed after the bones have healed (6-24 mont…
  • College: College of Medicine (COM)
  • Inventors: Dean, David; Elahinia, Mohammad; Ibrahim, Hamdy
  • Licensing Officer: Norris, Francis "Frank"

Machine-Learning Algorithm for Improved Speech Intelligibility in Noise
TS-042266 — A monaural machine-learning algorithm for classifying time-frequency units in an unknown signal, which results in marked speech-intelligibly improvements in noisy signals.
A primary complaint of hearing-impaired (HI) listeners is poor speech recognition in background noise. This issue can be quite debilitating and persists despite considerable efforts to improve hearing technology. Despite considerable effort, monaural (single-microphone) algorithms capable of incre…
  • College: College of Arts & Sciences
  • Inventors: Healy, Eric; Vasko, Jordan
  • Licensing Officer: Hong, Dongsung

Machine-Learning Algorithm for Improved Speech Intelligibility in Noise
TS-042266 — A monaural machine-learning algorithm for classifying time-frequency units in an unknown signal, which results in marked speech-intelligibly improvements in noisy signals.
A primary complaint of hearing-impaired (HI) listeners is poor speech recognition in background noise. This issue can be quite debilitating and persists despite considerable efforts to improve hearing technology. Despite considerable effort, monaural (single-microphone) algorithms capable of incre…
  • College: College of Arts & Sciences
  • Inventors: Healy, Eric; Vasko, Jordan
  • Licensing Officer: Hong, Dongsung

Junctional Tourniquet for Groin and Axillary Regions
TS-041808 — A tourniquet with a ratcheting lock to keep pressure on wounds in the groin and axillary regions. Hemostasis can be achieved while the patient is still in the field.
Patients with blood loss in the field need to be treated immediately to prevent ongoing blood loss, shock, and death; bleeding from extremity and junctional wounds is the leading cause of potentially preventable death from penetrating injuries. Direct manual pressure is effective for the initial c…
  • College: OSU Wexner Medical Center
  • Inventors: McElroy, James; Graham, Nadi; Nocera, Tanya
  • Licensing Officer: Flammang, Ann Marie

Show More Technologies

Loading icon