# of Displayed Technologies: 20 / 115

Applied Category Filter (Click To Remove): Electronics & Photonics


Categories

A Method for Accurate Cross Band Channel Prediction
TS-068476 — The Need Modern wireless networks, including 5G and future 6G systems, rely heavily on accurate channel prediction to ensure efficient and reliable communication. Frequency Domain Duplexing (FDD) systems face challenges in accurately predicting downlink channels from uplink channels, particularly in…
  • College: College of Engineering (COE)
  • Inventors: Banerjee, Avishek; Parthasarathy, Srinivasan; Srinivasan, Kannan
  • Licensing Officer: Randhawa, Davinder

A Scalable Method for Minimizing Beam-Training Overhead in mmWave Communications
TS-068475 — The Need As mmWave technology becomes the backbone of 5G and other advanced communication systems, the demand for fast, reliable, and scalable beamforming solutions has surged. Traditional beam-training methods are computationally intensive and time-consuming, leading to delays in establishing high-…
  • College: College of Engineering (COE)
  • Inventors: Srinivasan, Kannan; Chen, Wei-Han; Liu, Xin; Parthasarathy, Srinivasan
  • Licensing Officer: Randhawa, Davinder

Passive Optical-to-RF Conversion for Secure Eavesdropping on Optical Wireless Communication Systems
TS-068474 — The Need As Optical Wireless Communication (OWC) systems become increasingly prevalent, there is a growing demand for innovative signal conversion techniques that enhance communication capabilities while addressing security vulnerabilities. Conventional methods of optical-to-RF signal conversion rel…
  • College: College of Engineering (COE)
  • Inventors: Liu, Xin; Song, Guanqun; Zhu, Ting
  • Licensing Officer: Randhawa, Davinder

Method for developing thick β-Ga2O3 films on (001) Ga2O3 substrates using (AlxGa1-x)2O3 buffer layer
TS-068473 — The Need β-Ga2O3 has spurred substantial interest in semiconductors and transistors in high-power/high-frequency electronics and ultraviolet optoelectronics. However, there exists a critical challenge of growing high-quality, thick layers of gallium oxide (Ga2O3) on Ga2O3 substrates. Existing …
  • College: College of Engineering (COE)
  • Inventors: Zhao, Hongping; Meng, Lingyu; Yu, Dong Su
  • Licensing Officer: Randhawa, Davinder

Self-Calibration Technique for mmWave Antenna Arrays Based on Everyday Communication Behaviors
TS-068472 — The Need The increasing adoption of mmWave technologies in 5G, IoT, and other advanced communication networks highlights a critical need for cost-effective, efficient, and scalable antenna calibration solutions. Traditional calibration methods rely on expensive laboratory setups and specialized equi…
  • College: College of Engineering (COE)
  • Inventors: Srinivasan, Kannan; Chen, Wei-Han; Liu, Xin
  • Licensing Officer: Randhawa, Davinder

Non-Contact Magnetocardiography for Measuring Cognitive Workload
TS-067810 — Work environments and other brain-intensive activities impose high demands on the cognitive and cerebral resources required to process vast amounts of information. This high demand can expose individuals to cognitive overload, which can be dangerous for their health and lead to errors and accidents.…
  • College: College of Engineering (COE)
  • Inventors: Kiourti, Asimina; Zhu, Keren
  • Licensing Officer: Randhawa, Davinder

A Non-Destructive Quality Control Test for Organic Coatings in Food Can Applications
TS-067800 — This technology is an electrical impedance test (EIT) for evaluating the integrity of the enamel coating found on the interior surface of canned foods.
Fruits and vegetables used in canning are picked at peak freshness, ensuring the best flavor and nutrient quality. Because canning preserves nutrients, canned foods can be as nutritious as fresh and frozen foods. The amount of minerals, fat-soluble vitamins, protein, fat, and carbohydrates remains r…
  • College: College of Engineering (COE)
  • Inventors: Frankel, Gerald "Jerry"; Kosanam, Koushik
  • Licensing Officer: Zinn, Ryan

A device for improving the breakdown performance of gallium oxide semiconductors
TS-067551 — Gallium Oxide (Ga2O3) is an inorganic compound with semi-conductivity properties (e.g., a large bandgap) that can be used for developing power electronics, UV photodetectors, solar cells, and sensors. βeta-Ga2O3, a polymorph, has a distinct advantage over other semiconductors that have high cri…
  • College: College of Engineering (COE)
  • Inventors: Dheenan, Ashok; Dhara, Sushovan; Rajan, Siddharth
  • Licensing Officer: Zinn, Ryan

Co-Axial Contained Electrospray Ionization Platform for Mass Spectrometry
TS-067158 — The Need Mass spectrometry (MS) is used across a wide range of applications for detection of various chemical analytes such as drug metabolites, pesticides, food adulterants, and natural product extracts. Recent developments have transformed MS into an all-purpose technique for in-situ and real-tim…
  • College: College of Arts & Sciences
  • Inventors: Badu-Tawiah, Abraham; Burris, Benjamin "Ben"; Grooms, Alex; Heiss, Derik; Kulyk, Dmytro
  • Licensing Officer: Panic, Ana

Endoscopic additive manufacturing of conductors and wireless implants
TS-067045 — The Need Wireless implants with integrated antennas are highly desirable for diagnostic, therapeutic, and monitoring applications due to their ability to communicate directly with external devices. However, the need for major surgical incisions to implant these devices poses significant risks, incl…
  • College: College of Engineering (COE)
  • Inventors: Kiourti, Asimina; Dontha, Balaji; Hoelzle, David; Li, Jinghua; Moulod, Mohammad
  • Licensing Officer: Randhawa, Davinder

Novel Quantitative Method to Detect Mold Growth in Buildings
TS-066963 — The Need Exposure to mold in homes costs billions of dollars every year. Exposure is particularly harmful to the 8% of the United States population that suffers from asthma; a leading cause of disability in children. Currently, odor, visible mold growth, and dampness are the best indicators of mold…
  • College: College of Engineering (COE)
  • Inventors: Dannemiller, Karen; Balasubrahmaniam, Neeraja; Bope, Ashleigh
  • Licensing Officer: Ashouripashaki, Mandana

Color Correction System for Accurate Colorimetric Smartphone Measurements
TS-066957 — The Need Colorimetric tests and remote image analysis are used in a wide range of industrial and medical applications. Digital image-based measurements made with smartphones are a promising platform to quantify colors at low cost, but suffer from inconsistency and errors caused by lens quality, sen…
  • College: College of Engineering (COE)
  • Inventors: Dannemiller, Karen; Panescu, Jenny; Qin, Rongjun; Song, Shuang; Zhang, Guixiang
  • Licensing Officer: Ashouripashaki, Mandana

Advanced Sensor Housing for Environmental Monitoring in Precision Agriculture and Beyond
TS-066793 — The Need In agriculture, the accurate measurement of gasses such as nitrous oxide (N2O) and nitrogen oxides (NOx) is crucial for optimizing fertilizer use, minimizing greenhouse gas emissions, and reducing air pollution. Current monitoring technologies are often expensive, complex, and not suitable…
  • College: College of Food, Agricultural, and Environmental Sciences (CFAES)
  • Inventors: Khanal, Sami; Bevers, Noah; Shearer, Scott; Tkach, Chris
  • Licensing Officer: Dahlman, Jason "Jay"

Advanced Mass Spectrometry Hybrid Ionization Technology for Comprehensive Molecular Analysis
TS-066752 — In today's fast-paced commercial and scientific environments, there is an increasing demand for precise and efficient analytical techniques capable of handling complex mixtures with diverse physicochemical properties. Existing ionization techniques like Electrospray Ionization (ESI) and Atmosp…
  • College: College of Arts & Sciences
  • Inventors: Badu-Tawiah, Abraham; Damale, Purva; Grooms, Alex; Kulyk, Dmytro
  • Licensing Officer: Panic, Ana

Advanced Sensor Arrays for Precise Gas Identification and Analysis
TS-066250 — A cutting-edge sensor system featuring p-n junctions in MOS materials for accurate detection and identification of gases.
In various industries, there is a growing demand for highly selective and sensitive gas sensors capable of accurately identifying specific gases within complex mixtures, addressing challenges in environmental monitoring, industrial safety, and healthcare diagnostics. This innovative sensor syst…
  • College: College of Arts & Sciences
  • Inventors: Dutta, Prabir; Govindhan, Maduraiveeran; Mondal, Suvra; Sun, Chenhu
  • Licensing Officer: Zinn, Ryan

Revolutionary NO Sensor for Highly Selective and Sensitive Gas Detection
TS-066249 — A novel sensor leveraging WO3 and Cr2O3 for selective NO detection in harsh environments and breath analysis with high sensitivity at ppb levels.
There is a critical demand for advanced gas sensors capable of selectively detecting nitric oxide (NO) in diverse applications such as environmental monitoring, industrial processes, and medical diagnostics, particularly in challenging environments with interfering gases like carbon monoxide (CO).…
  • College: College of Arts & Sciences
  • Inventors: Dutta, Prabir; Govindhan, Maduraiveeran; Mondal, Suvra; Sun, Chenhu
  • Licensing Officer: Zinn, Ryan

Metal oxide-based resistive type sensor for the detection of carbon monoxide at room temperature
TS-066246 — Our innovative CO sensor utilizes hydrated ruthenium oxide to detect carbon monoxide within a gas mixture with high sensitivity and selectivity at temperatures ranging from 25°C to 300°C.
Reliable and low-cost CO sensors with high sensitivity and selectivity are essential for environmental safety and industrial control, particularly to monitor combustion environments, automotive emissions, and various industrial processes, ensuring compliance with regulations and minimizing health …
  • College: College of Arts & Sciences
  • Inventors: Dutta, Prabir; Adeyemo, Adedunni
  • Licensing Officer: Zinn, Ryan

Compact High-Temperature Solid-State Potentiometric Oxygen Sensor
TS-066235 — Oxygen sensors are crucial for monitoring oxygen levels in combustion and industrial processes, but current sensors require complex plumbing for reference gas, limiting their placement and operational temperature range. There is a pressing need for a robust, high-temperature oxygen sensor that is …
  • College: College of Arts & Sciences
  • Inventors: Dutta, Prabir; Akbar, Sheikh; Ramasamy, Ramamoorthy; Routbort, Jules; Singh, Dileep; Spirig, John
  • Licensing Officer: Zinn, Ryan

Open Circuit Voltage Photodetector
TS-065426 — Photodetectors are devices that detect light and convert it into an electrical signal. They operate based on the photoelectric effect, in which photons (light particles) strike the semiconductor material, creating electron-hole pairs that lead to the flow of electrical current that can be measured.
Existing photodetectors are susceptible to various noise sources, such as thermal and electronic. The noise can degrade the signal-to-noise ratio and affect the accuracy of measurements, particularly in low-light conditions. This technology is an open-circuit voltage photodetector (OCVP) that…
  • College: College of Engineering (COE)
  • Inventors: Krishna, Sanjay; Fuller, Earl; Kazemi, Alireza; Khalil, Waleed; Ronningen, TJ; Smith, Dale "Shane"; Specht, Teressa; Tantawy, Ramy "Ramy"
  • Licensing Officer: Zinn, Ryan

Unlocking Quantum Communication: Empowering Entangled Photon Pairs with Temperature-Insensitive Technology
TS-065416 — The Need In the rapidly advancing realm of quantum information science, there's an escalating demand for reliable sources of entangled photon pairs, the fundamental building blocks for various quantum communication technologies. However, generating these entangled pairs for quantum devices is c…
  • College: College of Arts & Sciences
  • Inventors: Gauthier, Daniel
  • Licensing Officer: Dahlman, Jason "Jay"

Show More Technologies

Loading icon