TS-065430 — Cost-effective method to prevent damaged electrodes when welding thin foils.

TS-065424 — Due to environmental concerns and the decreasing supply of fossil fuels, there is substantial demand for nuclear-based energy production. Nuclear energy now provides about 10% of the world's electricity from about 440 power reactors and is the second largest source of low-carbon power. In addition, over 50 smaller countries utilize nuclear energy in about 220 research-size reactors. These reactors are used to produce medical and industrial isotopes and several other purposes.

TS-065423 — Turbine aircraft engines (jet engines) are a type of propulsion system commonly used in aviation. These engines operate on jet propulsion, where air is drawn into the engine, mixed with fuel, ignited, and then expelled at high speed to generate thrust. Jet engines are used in commercial and military aircraft, as well as helicopters.

TS-065422 — Light olefins, such as ethylene and propylene, are essential building blocks in the petrochemical industry and have a wide range of uses in various applications. The most common uses for olefins include polymers, chemical intermediates, solvents, rubber, and nanomaterials, among others.

TS-064265 — In industrial settings, the demand for safe and efficient methods of producing ethylene, ethane, and methane is paramount. Existing ethylene production processes often involve oxygen-dependent enzymes, resulting in a flammable ethylene-oxygen gas mixture. Moreover, methane and ethane, when mixed w…

TS-064150 — The Need As the global demand for energy storage devices continues to surge, the limitations of conventional lithium-ion batteries become increasingly evident. Dwindling lithium reserves are unable to meet the burgeoning needs of modern society, necessitating the exploration of alternative solution…

TS-063346 — A reliable compact device for efficiently compressing natural gas fuel for automobiles

TS-063305 — Energy use is a major concern for many industrial and manufacturing companies. Given the cost of energy and the increasing importance green energy policies, it is critical that manufacturers understand how their energy usage can be performed in a way that minimizes cost and environmental impact. …

TS-063283 — As the adoption of electric vehicles (EVs) becomes more widespread, there is an increasing emphasis on improving charging technologies. There is substantial commercial need for technologies that sit on-board EVs, enhancing charging efficiency and reducing mechanical complexity. The Ohio State U…

TS-063224 — The Need In the rapidly evolving landscape of electric vehicle (EV) technology, there exists a pressing commercial need for rechargeable lithium-ion batteries (LiBs) that can not only deliver high charge capacities and power densities but also address the critical issues of capacity fading and safe…

TS-063007 — The Need In disaster-stricken areas, timely and accurate reconnaissance is paramount for effective response and recovery efforts. Traditional methods of assessing damage to critical infrastructure, such as power distribution poles, often involve time-consuming manual inspections, leading to delays …

TS-062601 — Only a small fraction of the radio frequency (RF) energy transmitted by smartphones and other wireless devices is used to communicate with a wireless access point. It would be useful to collect or harvest the unused RF signals in order to convert them to direct current (DC) power and supplement th…

TS-062596 — Conventional rectifying circuit designs convert alternating-current (AC) signals into direct-current (DC) signals via the used of diodes. Low-barrier Schottky diodes are used in low AC power cases such as with ambient radio frequency (RF) signals. Ideally, each diode is only turned on during the p…

TS-062483 — Measurement/detection of analytes (e.g., biomarkers) in different environments (e.g., biofluids/organs) is typically performed using a biosensor. Available bio-integrated sensors do not provide the capability to map biomarker concentrations, require a power source to function, use a limited number of electrodes, and normally can only measure a specific type of biofluid but not others. The use of glutamate mapping technology (radioactive or fluorescent ligand bound to a glutamate receptor) has been evaluated and found to require bulky/expensive medical equipment, a power source for measurement, cannot be miniaturized or integrated into a bio tissue, and require patients to be stationary during measurement.

TS-062369 — The Need: In the pursuit of large-scale energy storage solutions, potassium batteries with organic liquid electrolytes have emerged as promising candidates. However, the use of liquid electrolytes presents challenges such as dendritic metal plating and oxygen/sulfur crossover from the cathode. To ov…

TS-062293 — The Need As the world rapidly transitions to electric mobility and seeks to combat climate change, the transportation sector faces a pressing challenge. Electric vehicles (EVs) hold the key to a sustainable future, but their high cost, primarily driven by expensive lithium-ion batteries, hinders ma…

TS-061876 — A novel method of creating catalytic material containing paired Lewis acids in combination with alkyl-metal precursors for improving the production of materials used in agricultural, chemical, and other commercial/industrial applications/processes.

TS-061849 — The Rare Earth Element Trap-Extract-Precipitate (REE-TEP) process is a cost-effective and environmentally benign approach to recover rare earth elements (REEs) from acidic waste streams. It involves beneficial reuse of readily available industrial by-products and a naturally occurring organic ligand resulting in REE concentrate that can be commercially processed to produce rare earth oxides (REOs).

TS-061848 — The current manufacturing methods for Lithium-Ion Batteries are limited to around 200 Wh/kg. Power density is a factor of the battery construction and is highly dependent on the electrodes.

TS-059305 — A novel method in which nucleophilic transition metal hydroxide groups are generated at the internal pore surfaces of MOFs to facilitate selective gas-phase CO2 fixation at low pressures via formation of metal bicarbonate species.

TS-059099 — SS+MEF technology to both prevent and treat algal bloom growth, as well as neutralize algal toxins.

TS-058818 — Novel method capable of using alkyl tin compounds to generate Lewis acid zeolite Sn-Beta.

TS-058408 — Freshwater resources around the world are under stress due to naturally occurring events and human impacts, causing an increase in cyanobacteria blooms. These cyanobacteria release harmful toxins, known as cyanotoxins. The proposed USV degrades the toxins on-site with UV light, reducing the accumulation of toxins, preventing groundwater contamination, and improving water quality.

TS-054465 — A reliable compact device for efficiently compressing natural gas fuel for automobiles

TS-051200 — Traditional AC distribution is not suitable for a wide range of applications in regard to efficiency, cost, and power carrying capacity compared to alternative distributions. Low voltage distribution suffers from high transmission losses due to higher current requirements necessitating thicker, he…

TS-050105 — This application relates generally to a novel redox relay flow batteries comprising redox-active solids configured to behave as storage materials and redox-active organic molecules configured to behave as energy shuttles.

TS-049909 — A control method based upon properties of linear systems to manipulate the vibrational amplitudes and frequencies of structural systems by exploiting piecewise-linear (PWL) nonlinearities.

TS-042856 — A Framework and Automatization process designed to determine the functionality of Embedded Digital Devices.

TS-041747 — Adsorbent for carbon dioxide capture with low energy input for regeneration, and high adsorption capacity

TS-041602 — This two-step method synthesizes novel asymmetric sulfonamide based lithium salts that are highly soluble, resulting in a highly-concentrated electrolyte with a large electrochemical window that significantly suppresses aluminum dissolution even in extreme oxidizing conditions.