# of Displayed Technologies: 12 / 12

Applied Category Filter (Click To Remove): Automotive


Categories

Predictive V2X Torque Control for Multi-E-Axle EV Efficiency
TS-070632 — The Need As electric vehicles (EVs) evolve toward multi-e-axle architectures, traditional energy management strategies fall short in optimizing power distribution and minimizing energy waste. Current systems lack the predictive intelligence to adapt to dynamic driving conditions, leading to suboptim…
  • College: College of Engineering (COE)
  • Inventors: Safder, Ahmad Hussain; Ahmed, Qadeer; Hanif, Athar
  • Licensing Officer: Ashouripashaki, Mandana

Wind speed and direction measurement system
TS-063362 — Introducing our Low-Drag Smart Tether System—the future of fluid speed and direction measurement. Experience unmatched accuracy, energy efficiency, and reliability, revolutionizing how we perceive and utilize wind data in the modern age.
In the realm of aerial technology, the demand for accurate, low-cost wind monitors that are both scalable and efficient has never been higher. Traditional methods, such as pitot tubes and cup-and-vane anemometers, are marred by issues like icing vulnerability, high energy consumption, and unsuitab…
  • College: College of Engineering (COE)
  • Inventors: Dapino, Marcelo; Headings, Leon
  • Licensing Officer: Zinn, Ryan

SimpleFill Gas Pressurization Device
TS-063346 — A reliable compact device for efficiently compressing natural gas fuel for automobiles
Compressed gas is useful in a number of different applications such as propulsion in vehicles. The global Compressed Natural Gas (CNG) market was valued at $14.8 billion in 2016, and is projected to reach $36 billion by 2023, growing at a CAGR of 14.1%. Furthermore, the Natural Gas Vehicle market …
  • College: College of Engineering (COE)
  • Inventors: Cantemir, Codrin; Canova, Marcello; Chiara, Fabio; Durand, James; Fly, Gerald; Triberti, Matteo; Underhill, Robert
  • Licensing Officer: Zinn, Ryan

Ported shroud centrifugal compressor modification for reduced noise and improved efficiency
TS-063345 — An improvement to the design of ported shrouds for centrifugal compressor resulting in reduced noise and improved efficiency
Implementing a ported shroud casing treatment is often used to extend the operating range of a centrifugal compressor. A centrifugal compressor is used in an engine to increase the pressure of the air entering the engine. This allows the engine to burn more fuel and air, producing more power. Cent…
  • College: College of Engineering (COE)
  • Inventors: Dehner, Richard
  • Licensing Officer: Zinn, Ryan

Vulnerability and Attackability analysis of automotive controllers using structural model of the system
TS-063239 — The Ohio State University has developed a vulnerability analysis technique for connected and autonomous vehicles that assesses the vulnerability and attackability of the automotive controllers to determine the security of the system. The Need Automated vehicle technologies improve safety, assis…
  • College: College of Engineering (COE)
  • Inventors: Renganathan, Vishnu; Ahmed, Qadeer
  • Licensing Officer: Ashouripashaki, Mandana

System and Method of Securing Vehicle-Pavement Interaction (Tago)
TS-063169 — Road safety is a paramount concern. Unpredictable road conditions, such as bumps and uneven surfaces, can pose significant risks to drivers. There is a pressing need for a technology that can sense and alert drivers about these road surface conditions in real-time, enhancing safety and improving t…
  • College: College of Engineering (COE)
  • Inventors: Athreya, Kannan; Sun, Wei
  • Licensing Officer: Randhawa, Davinder

Dynamic Control Scheme for Multiphase Electric Machine
TS-063033 — The Need As automobile manufacturers strive to achieve greater fuel efficiency and reduce emissions, the adoption of Electric Vehicles (EVs) and other Electric Drive Systems (EDSs) has surged. However, these electrified powertrains face performance challenges, especially in extreme environments. To…
  • College: College of Engineering (COE)
  • Inventors: Hanif, Athar; Ahmed, Qadeer
  • Licensing Officer: Ashouripashaki, Mandana

SimpleFill Gas Pressurization Device
TS-054465 — A reliable compact device for efficiently compressing natural gas fuel for automobiles
Compressed gas is useful in a number of different applications such as propulsion in vehicles. The global Compressed Natural Gas (CNG) market was valued at $14.8 billion in 2016, and is projected to reach $36 billion by 2023, growing at a CAGR of 14.1%. Furthermore, the Natural Gas Vehicle market …
  • College: College of Engineering (COE)
  • Inventors: Chiara, Fabio; Canova, Marcello; Cantemir, Codrin; Durand, James; Fly, Gerald; Triberti, Matteo; Underhill, Robert
  • Licensing Officer: Zinn, Ryan

Vehicle-in-Virtual-Environment Method for Autonomous Driving System Development and Evaluation
TS-054005 — This technology is a Vehicle-in-Virtual Environment (VVE) method for testing and evaluating Autonomous Vehicles (AV). The VVE approach is a safe, reliable, repetitive, and scalable method of testing AVs, decreasing the risks and costs of testing AVs on public roads.
The demand for autonomous vehicles continues to grow as companies and cities realize the effect on the costs, safety, and efficiency that AVs have on everyday lives. Initiatives such as MCity in Detroit, Michigan, and Smart City in Columbus, Ohio, show a strong commitment to the development of aut…
  • College: College of Engineering (COE)
  • Inventors: Guvenc, Levent; Aksun Guvenc, Bilin
  • Licensing Officer: Randhawa, Davinder

A proximity sensor for the detection of hands on a steering wheel
TS-048591 — An embedded coax proximity sensor for the detection of hands or other objects near a vehicle's steering wheel
The coming age of autonomous vehicles will require the development of many new technologies to keep the vehicle occupants safe even when no one is paying attention to the vehicle operation. At present, given the limited capabilities of autonomous vehicles, it is necessary for the driver to monitor…
  • College: College of Engineering (COE)
  • Inventors: Lee, Robert; Kiourti, Asimina; Wang, Zhenyu
  • Licensing Officer: Zinn, Ryan

Method for Reducing Aerodynamic Drag on Tractor-Trailers
TS-038398 — A bio-inspired sidewall design to increase fuel efficiency and lower greenhouse gas emissions.
Tractor-trailers are essential to the United States (U.S.) economy. The annual value of freight transported in the U.S. in 2017 was $19 trillion, an increase from $18 trillion in 2012. Of the $19 trillion, $13.7 trillion (72%) was transported by the trucking industry. The high fuel consumption by …
  • College: College of Engineering (COE)
  • Inventors: Prakash, Shaurya; Rangharajan, Kaushik Krishna "Kaushik"; West, Joseph; Zezinka, Zachary
  • Licensing Officer: Zinn, Ryan

Gear Baffle
TS-037263 — A transmission gear baffle that permits directed flow of fluid resulting from gear rotation in a fluid bath.
Efficient propulsion systems in motor vehicles require effective lubrication and cooling to sustain continuous operation and prolong their lifespan. However, traditional transmission setups often suffer from fluid-related inefficiencies such as churning loss, fluid impact loss, and aeration, which…
  • College: College of Engineering (COE)
  • Inventors: Kahraman, Ahmet; Shon, Samuel; Talbot, David
  • Licensing Officer: Zinn, Ryan

Loading icon