# of Displayed Technologies: 10 / 12

Applied Category Filter (Click To Remove): Medical Devices


Categories

X-Ray Assistive Device for Standardizing the Knee Templating Process
TS-054471 — Knee templating is used as part of the pre-operative planning for knee replacement to determine the best fit for an implant. The current assistive devices used to determine fit are unreliable and inaccurate for proper patient fit. A new device is suggested to overcome these limitations.
Over 600,000 knee replacements are performed per year. As part of the pre-operative planning for surgery, x-ray images are taken to determine the proper fit for the implant. Even with the use of a calibration ball, this knee templating procedure remains inaccurate and unreliable for a number of re…
  • College: College of Engineering (COE)
  • Inventors: Ruegsegger, Mark; Aery, Dylan; Browske, Kimberly; Cantrell, Kaleb "Kaleb"; Reilman, Zach; Thew, Maddie
  • Licensing Officer: Zinn, Ryan

Smart Platform for Engineered Electroceutical Dressings (SPEEDs) Enables Better Wound Care
TS-050245 — An integrated platform with multiple sensing modalities to actively orchestrate antimicrobial activity and wound healing.
Wound healing and disinfection for chronic wounds presents significant hurdles within the medical industry. Current state of art is inadequate and adds a significant cost burden to the healthcare system with many health and life-quality challenges for patients. After the formation of an open wound…
  • College: College of Engineering (COE)
  • Inventors: Prakash, Shaurya; Heald, Rachel; Mohana Sundaram, Prashanth; Narayanan, Kavya; Stoodley, Paul; Subramaniam, Vishwanath; Vilku, Gurleen; Wilgus, Traci; Wozniak, Daniel
  • Licensing Officer: Hong, Dongsung

Gas Sensors for Health Monitoring and Diagnostics
TS-047136 — A range of low-cost gas sensors for non-invasive diagnostic tests and health monitoring.
Exhaled human breath is a combination of hundreds of gases including inorganic molecules such as NO, NH3 or CO, and volatile organic molecules such as acetone, ethane, and isoprene. Some of these gases are produced by the body as the result of physiological processes. Known as ‘biomarkers&rs…
  • College: College of Engineering (COE)
  • Inventors: Gouma, Pelagia-Iren
  • Licensing Officer: Gooray, Arthur "Art"

ReScribe: Transcription factors for reprogramming of diseased musculoskeletal related cells
TS-046978 — Transcription factors that can upregulate desired genes in diseased tissue to reprogram diseased cells, thereby reversing the disease and creating healthy non-diseased phenotype genes. These transcription factors would be especially useful in musculoskeletal diseases such as back pain and osteoarthritis.
Musculoskeletal diseases including osteoarthritis and chronic low back pain, are debilitating, painful, and often difficult to treat. Intervertebral disc (IVD) degeneration, as an example, is strongly associated with low back pain, a leading cause of disability worldwide. According to the American…
  • College: College of Engineering (COE)
  • Inventors: Walter, Devina; Gallego Perez, Daniel; Higuita Castro, Natalia; Hoyland, Judith; Khan, Safdar; Tang, Shirley "Shirley Nina"; Walter, Benjamin
  • Licensing Officer: Norris, Francis "Frank"

Folding Transducer Array for Compact and Deployable Wave-Energy Guiding System
TS-043186 — A novel acoustic/ultrasonic wave-energy guiding system that utilizes structural topology to enhance directional and spectral sensitivities instead of phase delay, offering exceptional versatility and adaptable performance.
Although acoustic beamforming systems that are based on phase delays can be used to enhance directional and spectral sensitivities, each source or receiver must be individually controlled by appropriate phase delays to guide the acoustic energy radiation/reception sensitivities. This results in a …
  • College: College of Engineering (COE)
  • Inventors: Harne, Ryan
  • Licensing Officer: Norris, Francis "Frank"

Folding Transducer Array for Compact and Deployable Wave-Energy Guiding System
TS-043186 — A novel acoustic/ultrasonic wave-energy guiding system that utilizes structural topology to enhance directional and spectral sensitivities instead of phase delay, offering exceptional versatility and adaptable performance.
Although acoustic beamforming systems that are based on phase delays can be used to enhance directional and spectral sensitivities, each source or receiver must be individually controlled by appropriate phase delays to guide the acoustic energy radiation/reception sensitivities. This results in a …
  • College: College of Engineering (COE)
  • Inventors: Harne, Ryan
  • Licensing Officer: Norris, Francis "Frank"

Nanopump Separation Device and Method
TS-037584 — A device for separating macromolecules in a solution of macromolecules having different molecular sizes
Many clinical and research applications involve separation of specific biological molecules, such as nucleic acids and proteins, for further analysis and characterization. A complex biological system can only be understood after each component has been separately analyzed, and proteins must be pur…
  • College: College of Engineering (COE)
  • Inventors: Hansford, Derek; Walczak, Robbie
  • Licensing Officer: Zinn, Ryan

Printed Electric Dressing (PED)
TS-037564 — An electrically conductive dressing that improves wound healing outcomes by inhibiting biofilm growth and neutralizing bacteria
Wound healing and disinfection represent significant hurdles within the medical industry with current standards for treatment falling short leaving patient safety compromised. After the formation of an open wound, adequate cleaning and dressing is paramount to preventing infection. However, it is …
  • College: College of Engineering (COE)
  • Inventors: Prakash, Shaurya; Bennett, Molly; Roy, Sashwati; Sen, Chandan; Steiner, Shomita; Subramaniam, Vishwanath
  • Licensing Officer: Hong, Dongsung

A Wearable Integrated System of Augmented Reality for Targeted Pathologic Specimen Sampling
TS-037535 — An integrated system to improve the quality of analysis of the resected tumor specimen that provides the pathologist with the latest technological and scientific advancements.
In the field of cancer pathology, the identification and sampling of tumors is essential for both surgical applications and treatment plans for patients that may include post-operative chemotherapy and/or radiation therapy. Currently pathologists and pathologist assistants rely on visual and tacti…
  • College: College of Engineering (COE)
  • Inventors: Yilmaz, Alper; Hall, Nathan; Hitchcock, Charles; Lee, Young Jin; Martin, Edward; Nichols, Shawnn; Ozer, Enver; Povoski, Stephen; Sachire, Jennifer; Xu, Ronald
  • Licensing Officer: Norris, Francis "Frank"

Non-Invasive Electromagnetic Method for Continuous Detection and Monitoring of Malaria
TS-015267 — An inexpensive device that utilizes non-invasive electromagnetic interactions with red blood cells to provide continuous monitoring for or diagnosis of malaria.
Plasmodium falciparum (PF), a form of malaria, is the deadliest and most prevalent parasite in humans due to its pervasiveness in temperate areas of the underdeveloped world. In 2013, there were nearly 198 million cases of malaria and an estimated 584,000 deaths, mostly among African children (BCC…
  • College: College of Engineering (COE)
  • Inventors: Subramaniam, Vishwanath; Drew, Mark; Smith, Brad; West, Joseph
  • Licensing Officer: Hong, Dongsung

Show More Technologies

Loading icon