Available Technologies
# of Displayed Technologies: 4 / 4
Applied Category Filter (Click To Remove): Electronics & Photonics
Substrates for vertical power devices
TS-062951 — The Need
In today's fast-paced technological landscape, there is an ever-growing demand for high-performance vertical power devices with enhanced breakdown voltage capabilities, exceeding 20 kV. Meeting this commercial need requires an innovative approach to semiconductor drift layer developmen…
- College: College of Engineering (COE)
- Inventors: Zhao, Hongping; Bhuiyan, A F M Anhar Uddin; Meng, Lingyu
- Licensing Officer: Randhawa, Davinder
A Lightweight Low Inductance Power Module with Insulated Baseplates
TS-048588 — A lightweight power module that reduces loop stray inductance while maintaining good electrical insulation and thermal dissipation.
In conventional power module structures, the die is attached to the substrate, usually direct bonding copper (DBC). The ceramic substrate layer provides electrical insulation between the circuit and cooling structure and attaches to a conductive baseplate material (Cu, Al, AlSiC) to dissipate heat…
- College: College of Engineering (COE)
- Inventors: Lyu, Xintong; Wang, Jin
- Licensing Officer: Ashouripashaki, Mandana
Methods and Apparatus to estimate phase of radiofrequency field
TS-037437 — A technique for estimating magnetic resonance imaging absolute phase to enhance machine efficiency and versatility.
Estimating absolute phase of Radiofrequency (RF) field including both the transmit field and receive sensitivity is very important for various stages of the magnetic resonance imaging (MRI) procedure. It can be used for mulit-transmit, RF shimming, parallel imaging reconstruction, electric propert…
- College: College of Arts & Sciences
- Inventors: Wang, Jinghua; Ding, Yu
- Licensing Officer: Panic, Ana
Method to enhance light extraction efficiency in tunnel-injected III-Nitrate ultraviolet LEDs
TS-037365 — A novel method to enhance the transverse-electric and transverse-magnetic polarized light via relfective surfaces on top of a tunnel junction based LED structure.
III-Nitride ultraviolet light emitting diodes (UV LEDs) have a variety of promising applications, including sterilization and water purification. Currently, UV LEDs use an absorbing p-GaN top layer for hole injection, which reduces light extraction efficiency to lower than 20%. UV light emissions …
- College: College of Engineering (COE)
- Inventors: Rajan, Siddharth; Akyol, Faith; Jamal-Eddine, Zane; Zhang, Yuewei
- Licensing Officer: Zinn, Ryan
