# of Displayed Technologies: 10 / 44

Applied Category Filter (Click To Remove): Medical Devices


Categories

Containment System for Heating and Off-Gassing
TS-065424 — Due to environmental concerns and the decreasing supply of fossil fuels, there is substantial demand for nuclear-based energy production. Nuclear energy now provides about 10% of the world's electricity from about 440 power reactors and is the second largest source of low-carbon power. In addition, over 50 smaller countries utilize nuclear energy in about 220 research-size reactors. These reactors are used to produce medical and industrial isotopes and several other purposes.
It is essential to meet the safeguard requirements in liquid-fueled molten salt reactors, fuel salt transportation, and fuel cycle processes and to develop effective methods for measuring and monitoring the mass of molten fuel salt or coolant salt. However, due to the complex and dynamic nature o…
  • College: College of Engineering (COE)
  • Inventors: Van Zile, Matthew; Cao, Lei Raymond; Kauffman, Andrew
  • Licensing Officer: Zinn, Ryan

IR Precision: Revolutionizing Colorectal Cancer Metastasis Diagnosis with the CCML Library
TS-064834 — The Need: Colorectal cancer remains a significant global health challenge, particularly when it metastasizes to the liver. Accurate and rapid diagnosis of metastatic liver lesions is crucial for effective treatment planning and patient outcomes. Traditional diagnostic methods often lack the specific…
  • College: College of Arts & Sciences
  • Inventors: Coe, James; Allen, Heather; Bradley, Rebecca; Hitchcock, Charles; Martin, Edward
  • Licensing Officer: Willson, Christopher

Skin Healing Technology: Dermal Substitutes and Engineered Skin with Rete Ridges
TS-064046 — Dermal substitute with engineered rete ridges improves epidermal-dermal communication and enhances burn wound treatment.
Massive burn injuries present a critical challenge in wound healing and prevention of infection. Current treatment methods are susceptible to blistering and other problems that can reduce engraftment. The Need Cultured epithelial autografts (CEAs) are a vital component in treating large burns, but…
  • College: College of Engineering (COE)
  • Inventors: Powell, Heather; Bailey, John; Blackstone, Britani "Niki"
  • Licensing Officer: Schultz, Teri

Adjustable Squatting Device for Constipation
TS-063959 — The Need Millions of individuals suffer from constipation due to the inability to relax pelvic floor muscles during bowel movements, leading to discomfort and strained efforts. Current solutions, like the Squatty Potty, lack adjustability and portability, limiting their effectiveness for a diverse …
  • College: College of Engineering (COE)
  • Inventors: Ruegsegger, Mark; Chakraborty, Subhankar; Gluzman, Isabella; Li, Yiqun; Piatkowski, Stephen; Puri, Raima
  • Licensing Officer: Bhatti, Hamid

Endoscopic additive manufacturing of biomaterials
TS-063919 — An articulating end effector for additive manufacturing that utilizes robot-assisted endoscopic surgery to implant synthetic tissues at local defects through “keyhole” incisions in patients. This innovative technology T2019-145 is part of a portfolio that also includes T2017-363. To learn more about both technologies, please visit https://oied.osu.edu/find-technologies and search using the phrase: Endoscopic additive manufacturing of biomaterials.
Robot-assisted surgery, tissue engineering, and additive manufacturing (AM) are emerging techniques in healthcare. Currently AM is used to develop synthetic tissues and organs, but open surgery is typically used to implant these scaffolds within the patient. This invasive procedure can subject pat…
  • College: College of Engineering (COE)
  • Inventors: Hoelzle, David; Asghari Adib, Ali; D'Souza, Desmond; Mansour, Daniel; Simeunovic, Andrej
  • Licensing Officer: Zinn, Ryan

High-K Dielectric barriers to suppress internal photoemission photocurrents
TS-063471 — In an increasingly digital world, the demand for efficient and reliable photodetectors is paramount. These devices are critical for a variety of applications, from medical imaging to defense systems. However, traditional photodetectors often struggle with low UV-visible rejection, limiting their e…
  • College: College of Engineering (COE)
  • Inventors: Rajan, Siddharth; McGlone, Joseph "Joe"; Wriedt, Nathan
  • Licensing Officer: Zinn, Ryan

A Regularized Conditional GAN for Posterior Sampling in Inverse Problems
TS-063238 — A novel regularization technique applicable for medical imaging applications that leverages conditional generative adversarial networks (cGANs) to generate reconstructed images in significantly shorter timeframes. The Need Several techniques are used for image reconstruction in the medical aren…
  • College: College of Engineering (COE)
  • Inventors: Bendel, Matthew; Ahmad, Rizwan; Schniter, Philip
  • Licensing Officer: Hampton, Andrew

Retrievable Stentgraft for Vascular Surgery and Regional Drug Delivery
TS-063006 — Medical device for vascular surgery and directed drug delivery
The Need Injuries involving hemorrhaging from the aorta, particularly in military and trauma settings, pose a significant threat to patients' lives. Current treatment options require clamping which completely restricts blood flow resulting in risks of complications such as coagulopathy and orga…
  • College: College of Medicine (COM)
  • Inventors: Tillman, Bryan; Kenawy, Dahlia
  • Licensing Officer: Schworer, Adam

Automated Endotracheal Intubation
TS-062900 — This cutting-edge technology redefines the intubation process by guiding the endotracheal tube into the airway with exceptional precision.
The Need Intubation is a critical medical procedure used to assist patients with breathing difficulties, executed through the insertion of an endotracheal tube (ET) into the windpipe. With over 313 million annual intubation procedures worldwide, ensuring first-pass success and minimizing complicati…
  • College: College of Engineering (COE)
  • Inventors: Ruegsegger, Mark; Elsayed-Awad, Hamdy; Hopping, Ethan; Lopez Vogler, Christian; Miles, Tim; Peiffer, Jordan
  • Licensing Officer: Bhatti, Hamid

Tracking Breast Tissue Tumor Cavity after Lumpectomy
TS-062715 — Radiopaque biodegradable polymer for the tracking of the breast tissue tumor cavity after lumpectomy and other radiation therapy applications
Approximately 40% of women diagnosed with breast cancer undergo a lumpectomy procedure. Approximately 170,000 lumpectomie are performed each yaer in the United States. Typically, this operation is followed by radiation therapy to ensure there are no remaining cancerous cells in the region. It is t…
  • College: College of Engineering (COE)
  • Inventors: Metzler, Sandra; Elisha, Deji; Evans, Izzy; Fedro, Joseph; Krakovsky, Mia; Sherry, Adam; Skoracki, Roman
  • Licensing Officer: Zinn, Ryan

Show More Technologies

Loading icon