Available Technologies
# of Displayed Technologies: 7 / 7
Applied Category Filter (Click To Remove): Instrumentation
Monolayer Etching of Wurtzite GaN/AlGaN/AlN Using Cyclic O2 Plasma and Atomic Ga/Al Flux Exposure
TS-063466 —
In the rapidly evolving world of semiconductor technology, there is a growing demand for efficient and precise methods of etching Gallium Nitride (GaN)-based semiconductors. Traditional wet and dry etching processes often damage the GaN, compromising the quality and performance of the final produc…
- College: College of Engineering (COE)
- Inventors: Rajan, Siddharth; Dheenan, Ashok; Rahman, Sheikh Ifatur; Wriedt, Nathan
- Licensing Officer: Ashouripashaki, Mandana
Laser Imaging of Gases for Real-Time Determination of Concentration and Location
TS-063051 — A stand-off gas detection system with active, laser-based sensing and imaging capabilities for commercial use
There is a critical need for a reliable, cost-effective, and safe method to detect gas leaks, particularly in gas lines to ensure the safety of service providers and customers. Distribution companies receive over 100,000 calls per year responding to gas odors, indicating potential leaks. The major…
- College: College of Engineering (COE)
- Inventors: Krishna, Sanjay; Ball, Christopher; Fink, Douglas "Rudy"; Fuller, Earl; Mooney, Douglas; Ringel, Brett; Ronningen, TJ
- Licensing Officer: Randhawa, Davinder
A vibration free, low temperature sample holder for side-entry transmission electron microscopes
TS-055118 — This invention is a vibration free and temperature adjustable sample holder for transmission electron microscopes, allowing improved imaging of beam-sensitive and temperature dependent specimens in the physical sciences.
Transmission electron microscopy (TEM) is used to capture fine detail of specimens less than 100 nm thick making it ideal for physical, chemical, and biological sciences. To generate an image of a physical science specimen, the sample must be cooled to cryogenic temperatures to halt atomic movemen…
- College: College of Engineering (COE)
- Inventors: Reifsnyder, Alexander; McComb, David
- Licensing Officer: Zinn, Ryan
Extreme-Condition Sensors for Use with Electrical Capacitance VolumeTomography & Capacitance Sensing Applications
TS-037841 — A modular and non-invasive ECVT sensor that can be adapted and scaled to vessel demands.
Electrical Capacitance Volume Tomography (ECVT) is a non-invasive image reconstruction that provides volumetric images of a material. An ECVT system is generally comprised of a sensor, data acquisition system, computer system, and software for reconstruction of the 3D image. Capacitance data colle…
- College: College of Engineering (COE)
- Inventors: Marashdeh, Qussai; Alghothani, Yousef; Hudak, Jesse; Legg, Geoffrey; Straiton, Benjamin; Tong, Andrew
- Licensing Officer: Ashouripashaki, Mandana
Cantilever Design for Measurement of Multi-Physical Properties using Atomic Force Microscopy
TS-036987 — A robust solution that helps researchers increase image and signal accuracy of Atomic Force Microscopy.
Atomic Force Microscopy (AFM) was first used to characterize properties of a sample, including physical, material, electromechanical and chemical properties. For most of these multi-physical characterization schemes, an AFM tip scans over a sample while the tip is in contact with the surface. At t…
- College: College of Engineering (COE)
- Inventors: Cho, Han Na "Hanna"; Bergman, Lawrence A; Dharmasena, Sajith; Kim, Seok; Vakakis, Alexander F.
- Licensing Officer: Zinn, Ryan
Device and Technique for Investigation of Phase Transformations in Metals and Alloys Using The Single Sensor Differential Thermal Analyzer (SS-DTA)
TS-015281 —
Dilatometry is a technique currently used for measuring thermal expansion and dilation in solids and liquids. NETZSCH currently offers a variety of dilatometers. However, this equipment can cost thousands of dollars. There is always room for improvement for a faster, simpler, and less expensive te…
- College: College of Engineering (COE)
- Inventors: Alexandrov, Boian; Lippold, John
- Licensing Officer: Zinn, Ryan
Simulcure Technique - Fabrication and Preparation of Structural Composites
TS-014977 — A fabrication technique to prepare a composite structure with sensor elements distributed in 3-D space for visualizing stress distribution.
Trends in home automation, wearable electronics, and autonomous vehicles have created networked ecosystems, in which computers coexist and play a critical role. In these ecosystems, sensors provide necessary inputs to monitor the environment and take situation-specific action. Currently, sensors a…
- College: College of Engineering (COE)
- Inventors: Sundaresan, Vishnu Baba
- Licensing Officer: Randhawa, Davinder
