Available Technologies
# of Displayed Technologies: 3 / 3
Applied Category Filter (Click To Remove): Semiconductors, Circuits, & Electronic Components
GaAsSb-AlGaAsSb Heterostructure Avalanche Photodiode
TS-062893 — A room temperature, ultra-high gain (M=278, λ=1550 nm, V=69.5 V, T=296 K) linear mode avalanche photodiode (APD) on an InP substrate using a GaAs0.5Sb0.5/Al0.85Ga0.15As0.56Sb0.44 separate absorption charge and multiplication (SACM) heterostructure.
An APD is a semiconductor-based analog of the photomultiplier. APDs exploit the impact ionization phenomenon and transform infrared (IR) light (l > 850 nm) into photocurrent. APDs have wide applicability; however, existing APDs have insufficient sensitivity and relatively high excess noise and …
- College: College of Engineering (COE)
- Inventors: Krishna, Sanjay; Jung, Hyemin; Lee, Seunghyun
- Licensing Officer: Randhawa, Davinder
Antimonide based Separate Absorption Charge and Multiplication Avalanche Photodiode
TS-062892 — A room temperature, ultra-high gain (M=278, λ=1550 nm, V=69.5 V, T=296 K) linear mode avalanche photodiode (APD) on an InP substrate using a GaAs0.5Sb0.5/Al0.85Ga0.15As0.56Sb0.44 separate absorption charge and multiplication (SACM) heterostructure.
An APD is a semiconductor-based analog of the photomultiplier. APDs exploit the impact ionization phenomenon and transform infrared (IR) light (l > 850 nm) into photocurrent. APDs have wide applicability; however, existing APDs have insufficient sensitivity and relatively high excess noise an…
- College: College of Engineering (COE)
- Inventors: Krishna, Sanjay; Jung, Hyemin; Lee, Seunghyun
- Licensing Officer: Randhawa, Davinder
Method to enhance light extraction efficiency in tunnel-injected III-Nitrate ultraviolet LEDs
TS-037365 — A novel method to enhance the transverse-electric and transverse-magnetic polarized light via relfective surfaces on top of a tunnel junction based LED structure.
III-Nitride ultraviolet light emitting diodes (UV LEDs) have a variety of promising applications, including sterilization and water purification. Currently, UV LEDs use an absorbing p-GaN top layer for hole injection, which reduces light extraction efficiency to lower than 20%. UV light emissions …
- College: College of Engineering (COE)
- Inventors: Rajan, Siddharth; Akyol, Faith; Jamal-Eddine, Zane; Zhang, Yuewei
- Licensing Officer: Zinn, Ryan
