Unlocking Scalable Non-Volatile Memory
TS-076603 — High-Stability Junctions for Next-Gen Chips
As traditional silicon CMOS microprocessors hit severe thermal limits, spintronics has emerged as the premier non-volatile alternative—encoding data using electron spin rather than charge to cut power drain. While spintronic systems like Magnesium Oxide (MgO )-based MRAM have successfully pr…
- College: College of Arts and Sciences (ASC)
- Inventors: Kawakami, Roland; Katoch, Jyoti; Singh, Simranjeet
- Licensing Officer: Dahlman, Jason "Jay"
Zero Trade-Off Carbon Capture
TS-076602 — The Bio-inspired MOF Advantage
Industrial CO2 capture is widely deployed at point-source emissions—such as power plants and cement factories—as well as in emerging Direct Air Capture installations. The dominant commercial technology, liquid amine scrubbing, relies on strong chemical bonds to deliver high capture cap…
- College: College of Arts and Sciences (ASC)
- Inventors: Wade, Casey; Bien, Caitlin
- Licensing Officer: Dahlman, Jason "Jay"
Alkane Dehydrogenation with Value adding Product
TS-076593 —
Light olefins are essential feedstocks for polymers and other high-value chemicals, but conventional alkane dehydrogenation is energy-intensive and constrained by reaction equilibrium. High operating temperatures can reduce selectivity, accelerate catalyst degradation, and promote unwanted byprodu…
- College: College of Engineering (COE)
- Inventors: Fan, Liang-Shih; Cheng, Zhuo; Hu, Jason; Jiang, Xiaofeng
- Licensing Officer: Ashouripashaki, Mandana
Method and software for auditing irrigation systems using thermal drone imaging
TS-076584 — A drone-enabled technology for auditing irrigation performance across golf courses
, athletic fields
, agricultural land
, parks
, and other managed landscapes. The system combines aerial sensor data with geospatial mapping and intelligent analysis to generate visual irrigation-audit maps and indicators of water-distribution uniformity and system efficiency. This approach may reduce the time and field labor required for conventional irrigation audits while helping users identify uneven watering and irrigation components that may need attention.
Researchers at The Ohio State University are developing a method and software workflow for evaluating irrigation-system performance using drone-mounted thermal imaging and geospatial analysis. The approach captures thermal imagery of turf surfaces before, during, and after an irrigation cycle. The i…
- College: College of Food, Agricultural, and Environmental Sciences (CFAES)
- Inventors: Vanlandingham, Tyler; Petrella, Dominic
- Licensing Officer: Giles, David
Ultra-Fast Intensity Measurement Technique for Advanced UV Photodetectors
TS-076541 —
Ga2O3 ultraviolet photodetectors are increasingly being deployed in applications such as water purification, industrial process monitoring, environmental sensing, defense systems, and advanced manufacturing. However, many emerging wide-bandgap photodetector technologies exhibit nonlinear responses…
- College: College of Engineering (COE)
- Inventors: Rajan, Siddharth; Orlandini, Davide; Wriedt, Nathan
- Licensing Officer: Ashouripashaki, Mandana
Frame-Resolved Ultrasonic Imaging for Weld and Defect Inspection
TS-076522 —
Manufacturers across aerospace, energy, transportation, and advanced manufacturing sectors require reliable methods to inspect critical components without destructive testing. Conventional ultrasonic inspections often provide only bulk through-thickness information, making it difficult to isolate …
- College: College of Engineering (COE)
- Inventors: Bourgeois, Desmond; McGinnis, Sean
- Licensing Officer: Ashouripashaki, Mandana
Label-Free Raman Imaging for Early Detection of Disease Remodeling
TS-076401 —
Many progressive diseases, including cardiac, neurological, and other chronic disorders, begin with subtle molecular and cellular changes long before conventional clinical signs become detectable. Current diagnostic approaches generally identify disease only after significant tissue remodeling or …
- College: College of Engineering (COE)
- Inventors: Veeraraghavan, Rengasayee; Ammon, Madison; Radwanski, Przemyslaw; Selimi, Zoja
- Licensing Officer: Ashouripashaki, Mandana
PCL Based Biopolymers with Extended Range and Possibilities
TS-076338 —
PCL has been a key material in modern medicine and advanced medical device manufacturing. Able to degrade away slowly in the body without producing toxic residues, PCL has been used for medical implants and controlled drug release over time. However, PCL is inherently hydrophobic and has set degra…
- College: College of Arts and Sciences (ASC)
- Inventors: Quinonez, Maria Priscila; Watkins, Davita
- Licensing Officer: Panic, Ana
Enhanced Light Extraction in Tunnel-Junction UV LEDs
TS-076325 —
UV LEDs, particularly those operating at shorter wavelengths, face persistent challenges in achieving high optical efficiency. Conventional device architectures can suffer from significant internal absorption and inefficient light extraction, limiting wall-plug efficiency and increasing power requ…
- College: College of Engineering (COE)
- Inventors: Rajan, Siddharth; Akyol, Faith; Jamal-Eddine, Zane; Zhang, Yuewei
- Licensing Officer: Zinn, Ryan
A Combined Negative Pressure Wound Therapy (NPWT) and Fluid Instillation Device for Open Abdomen Applications
TS-076286 —
Literature shows that Negative Pressure Wound Therapy (NPWT) combined with fluid instillation can improve abdominal trauma patient outcomes. Current standards of practice are inefficient, involving assembly and off-label use of at least 8 medical products. This is further complicated by varied pro…
- College: College of Engineering (COE)
- Inventors: Thakkar, Neil; Eichaker, Lauren; Eppers, Daelyn; Juarez, Angelo; Le, Anna; Mathew, Joel; Mihalich, James; Nocera, Tanya; Steere, Camryn
- Licensing Officer: Sharick, Joe
Show More Technologies
