Available Technologies
# of Displayed Technologies: 9 / 9
Applied Category Filter (Click To Remove): Industrial Processes & Manufacturing
System for automated high-speed imaging and genetic manipulation of C. elegans on agar media
TS-065892 — The Need
The microscopic worm C. elegans is a model animal studied in more than 1500 biological and medical research laboratories worldwide due to its genetic manipulability and optical transparency. In C. elegans research, the manual process of picking worms between plates presents a significant …
- College: College of Engineering (COE)
- Inventors: Fang-Yen, Christopher "Chris"; Alhalbi, Serge; Li, Zihao
- Licensing Officer: Randhawa, Davinder
Automatic Mechanical Assembly Loops/Stacks Detection
TS-064578 — This software solution revolutionizes the process of tolerance stack analysis in mechanical assemblies. It automatically detects and extracts tolerance stacks as the foundational step for precise tolerance analysis and schema generation.
This software solution revolutionizes the process of tolerance stack analysis in mechanical assemblies. It automatically detects and extracts tolerance stacks as the foundational step for precise tolerance analysis and schema generation.
The Need
Analyzing tolerance stacks in mechanical assembl…
- College: College of Engineering (COE)
- Inventors: Haghighi, Payam; Shah, Jami
- Licensing Officer: Randhawa, Davinder
Rare Earth Element Trap-Extract-Precipitate (REE-TEP) Process
TS-061849 — The Rare Earth Element Trap-Extract-Precipitate (REE-TEP) process is a cost-effective and environmentally benign approach to recover rare earth elements (REEs) from acidic waste streams. It involves beneficial reuse of readily available industrial by-products and a naturally occurring organic ligand resulting in REE concentrate that can be commercially processed to produce rare earth oxides (REOs).
The Need
Rare earth elements are critical components of many emerging technologies. Because conventional sources of REEs in the United States are limited, identifying alternative sources is important. Many mining and industrial waste streams have elevated concentrations of REEs and can be potential…
- College: College of Engineering (COE)
- Inventors: Cheng, Chin-Min "Jason"; Bielicki, Jeffrey "Jeff"; Butalia, Tarunjit; Lenhart, John
- Licensing Officer: Randhawa, Davinder
TS-061848 — The current manufacturing methods for Lithium-Ion Batteries are limited to around 200 Wh/kg. Power density is a factor of the battery construction and is highly dependent on the electrodes.
The Need
Conventional Li-ion batteries consist of electrodes constructed of stacks of 70 µm films. The thin electrodes then require current collectors and separators for assembly, which increase mass without adding charge capacity. The need for these inactive components limits the power densi…
- College: College of Engineering (COE)
- Inventors: Kim, Jung Hyun; Rao, Lalith; Sayre, Jay
- Licensing Officer: Randhawa, Davinder
Battery Discharge Simulator (Portfolio)
TS-061804 — A portfolio of technologies
The Need
Battery design is becoming increasingly complex with the increased applications for electric vehicles and power storage for renewable energy such as solar and wind. Designers continue to pursue more efficient power designs with resilient characteristics to ensure long battery life over con…
- College: College of Engineering (COE)
- Inventors: Conlisk, Terrence "Terry"; Marcicki, James
- Licensing Officer: Randhawa, Davinder
High Efficiency LED Designs Using Quantum Well Engineering
TS-057127 — Achieving high efficiency LEDs with green, amber and longer wavelengths using III-nitride/II-IV-nitride heterostructures as the active media.
Although extensive research and development over the past two decades has resulted in close to 100% external quantum efficiency (EQE) of InGaN based blue light emitting devices, efficiency of the longer visible wavelength emitting devices has remained relatively low. Spontaneous polarization origi…
- College: College of Engineering (COE)
- Inventors: Zhao, Hongping; Zhang, Kaitian
- Licensing Officer: Randhawa, Davinder
Simulcure Technique - Fabrication and Preparation of Structural Composites
TS-014977 — A fabrication technique to prepare a composite structure with sensor elements distributed in 3-D space for visualizing stress distribution.
Trends in home automation, wearable electronics, and autonomous vehicles have created networked ecosystems, in which computers coexist and play a critical role. In these ecosystems, sensors provide necessary inputs to monitor the environment and take situation-specific action. Currently, sensors a…
- College: College of Engineering (COE)
- Inventors: Sundaresan, Vishnu Baba
- Licensing Officer: Randhawa, Davinder
Alcohol Production from Carbon Dioxide
TS-014972 — An electrochemical process on a metal electrode catalyst is used to produce alcohols such as ethanol, ethylene, propanol, acetic acid, ethane, and formic acid from the direct conversion of carbon dioxide
In the United States, there is an increasing interest in ethanol as an alternative fuel source to decrease the dependence on fossil fuels. In 2012, the National Corn Growers Association reported that 27.3% of the corn harvested in the U.S. was used for the production of ethanol. This has sparked a…
- College: College of Arts & Sciences
- Inventors: Co, Anne; Billy, Joshua; Coleman, Eric; Walz, Kendahl
- Licensing Officer: Randhawa, Davinder
High Surface Area Catalysts for Fuel Cells
TS-014755 — A high performance and durable reductive catalyst for polymer and metal-air fuel cells
Fuel cells offer a cleaner, more-efficient alternative to gasoline and other fossil fuels, and have the potential to revolutionize the way the nation is powered. Fuel cells operate in a similar fashion to conventional batteries, but fuel cells can be continually supplied with a fresh feed of fuel,…
- College: College of Arts & Sciences
- Inventors: Co, Anne; Coleman, Eric
- Licensing Officer: Randhawa, Davinder
