# of Displayed Technologies: 17 / 17

Applied Category Filter (Click To Remove): Energy, Earth, & Environmental


Categories

Sacrificial Layer to Facilitate Welding of Thin Foils
TS-065430 — Cost-effective method to prevent damaged electrodes when welding thin foils.
Manufacturing of automotive lithium-ion batteries and battery packs is attracting growing attention with the driving demands of electric vehicles. During battery assembly, multi-layers of metal films, functioning as anodes, cathodes, or bus-bars are welded together. Achieving satisfying weld quali…
  • College: College of Engineering (COE)
  • Inventors: Liu, Xun; Kwon, Ho; Shah, Umair
  • Licensing Officer: Zinn, Ryan

Containment System for Heating and Off-Gassing
TS-065424 — Due to environmental concerns and the decreasing supply of fossil fuels, there is substantial demand for nuclear-based energy production. Nuclear energy now provides about 10% of the world's electricity from about 440 power reactors and is the second largest source of low-carbon power. In addition, over 50 smaller countries utilize nuclear energy in about 220 research-size reactors. These reactors are used to produce medical and industrial isotopes and several other purposes.
It is essential to meet the safeguard requirements in liquid-fueled molten salt reactors, fuel salt transportation, and fuel cycle processes and to develop effective methods for measuring and monitoring the mass of molten fuel salt or coolant salt. However, due to the complex and dynamic nature o…
  • College: College of Engineering (COE)
  • Inventors: Van Zile, Matthew; Cao, Lei Raymond; Kauffman, Andrew
  • Licensing Officer: Zinn, Ryan

Fluid Active Flow Control Enabled Variable Turbine Vane
TS-065423 — Turbine aircraft engines (jet engines) are a type of propulsion system commonly used in aviation. These engines operate on jet propulsion, where air is drawn into the engine, mixed with fuel, ignited, and then expelled at high speed to generate thrust. Jet engines are used in commercial and military aircraft, as well as helicopters.
While turbine aircraft engines offer higher efficiency and performance than their counterparts, there is still a need to improve efficiency and reduce fuel consumption and greenhouse gases. It’s estimated that jet engines account for over 2.5% of all CO2 emissions, and there are substantial …
  • College: College of Engineering (COE)
  • Inventors: Spens, Alexander; Bons, Jeffrey
  • Licensing Officer: Zinn, Ryan

Highly Efficient Light Olefin Selectivity & Production Process
TS-065422 — Light olefins, such as ethylene and propylene, are essential building blocks in the petrochemical industry and have a wide range of uses in various applications. The most common uses for olefins include polymers, chemical intermediates, solvents, rubber, and nanomaterials, among others.
Although Light olefins are used globally in many products, the catalytic processes to produce them are energy intensive with a large carbon footprint and the production of greenhouse gases and water pollution. As a result, substantial efforts are being made in the industry to develop more sustain…
  • College: College of Engineering (COE)
  • Inventors: Ozkan, Umit; Gunduz, Seval; Kim, Jaesung
  • Licensing Officer: Zinn, Ryan

SimpleFill Gas Pressurization Device
TS-063346 — A reliable compact device for efficiently compressing natural gas fuel for automobiles
Compressed gas is useful in a number of different applications such as propulsion in vehicles. The global Compressed Natural Gas (CNG) market was valued at $14.8 billion in 2016, and is projected to reach $36 billion by 2023, growing at a CAGR of 14.1%. Furthermore, the Natural Gas Vehicle market …
  • College: College of Engineering (COE)
  • Inventors: Cantemir, Codrin; Canova, Marcello; Chiara, Fabio; Durand, James; Fly, Gerald; Triberti, Matteo; Underhill, Robert
  • Licensing Officer: Zinn, Ryan

Optimal Scheduling with Energy Costs
TS-063305 — Energy use is a major concern for many industrial and manufacturing companies. Given the cost of energy and the increasing importance green energy policies, it is critical that manufacturers understand how their energy usage can be performed in a way that minimizes cost and environmental impact. …
  • College: College of Engineering (COE)
  • Inventors: Posner, Marc; Hall, Nicholas
  • Licensing Officer: Zinn, Ryan

RF Energy Harvesting Wireless Mobile Device Charger
TS-062601 — Only a small fraction of the radio frequency (RF) energy transmitted by smartphones and other wireless devices is used to communicate with a wireless access point. It would be useful to collect or harvest the unused RF signals in order to convert them to direct current (DC) power and supplement th…
  • College: College of Engineering (COE)
  • Inventors: Chen, Chi-Chih; Koksal, C. Emre; Shroff, Ness; Tallos, Roland
  • Licensing Officer: Zinn, Ryan

Passive RF Rectifier Circuit Design with Harmonic Harvester
TS-062596 — Conventional rectifying circuit designs convert alternating-current (AC) signals into direct-current (DC) signals via the used of diodes. Low-barrier Schottky diodes are used in low AC power cases such as with ambient radio frequency (RF) signals. Ideally, each diode is only turned on during the p…
  • College: College of Engineering (COE)
  • Inventors: Chen, Chi-Chih
  • Licensing Officer: Zinn, Ryan

SimpleFill Gas Pressurization Device
TS-054465 — A reliable compact device for efficiently compressing natural gas fuel for automobiles
Compressed gas is useful in a number of different applications such as propulsion in vehicles. The global Compressed Natural Gas (CNG) market was valued at $14.8 billion in 2016, and is projected to reach $36 billion by 2023, growing at a CAGR of 14.1%. Furthermore, the Natural Gas Vehicle market …
  • College: College of Engineering (COE)
  • Inventors: Chiara, Fabio; Canova, Marcello; Cantemir, Codrin; Durand, James; Fly, Gerald; Triberti, Matteo; Underhill, Robert
  • Licensing Officer: Zinn, Ryan

Device for Harvesting Vibration Energy to Power Remote Sensors or Feed the Power Grid
TS-049909 — A control method based upon properties of linear systems to manipulate the vibrational amplitudes and frequencies of structural systems by exploiting piecewise-linear (PWL) nonlinearities.
Energy harvesting from system vibrations is considered a promising green energy source with the capacity to both self-power small-scale devices and fulfill the need of large-scale electricity generation. A recent report by BCC research found that the markets for Vibration, Displacement, and Mechan…
  • College: College of Engineering (COE)
  • Inventors: D'Souza, Kiran; Tien, Meng-Hsuan
  • Licensing Officer: Zinn, Ryan

Transportation Asset Management Program
TS-039992 — Transportation Asset Management Program offers a unique bridge condition index (BCI) and management solution for large bridge inventories to be used as a reliable metric and asset management framework
Transportation infrastructure depends on a robust and well-maintained system of bridges. In the U.S., federal law requires that bridges be inspected once every two years. Some states, including Ohio, require bridges to be inspected every year. One problem with these inspections is that for several…
  • College: College of Engineering (COE)
  • Inventors: Shafieezadeh, Abdollah; Fereshtehnejad, SeyedEhsan "Ehsan"; Hur, Jieun
  • Licensing Officer: Zinn, Ryan

Method for Reducing Aerodynamic Drag on Tractor-Trailers
TS-038398 — A bio-inspired sidewall design to increase fuel efficiency and lower greenhouse gas emissions.
Tractor-trailers are essential to the United States (U.S.) economy. The annual value of freight transported in the U.S. in 2017 was $19 trillion, an increase from $18 trillion in 2012. Of the $19 trillion, $13.7 trillion (72%) was transported by the trucking industry. The high fuel consumption by …
  • College: College of Engineering (COE)
  • Inventors: Prakash, Shaurya; Rangharajan, Kaushik Krishna "Kaushik"; West, Joseph; Zezinka, Zachary
  • Licensing Officer: Zinn, Ryan

Semi-crystalline Polymer Nanocomposite and Foam Structure and Method for Making the Same
TS-038002 — A new way to create polymer nanocomposite foam structures with enhanced mechanical properties.
Nanotechnology is a constantly growing field, and has a vast potential to change the world for the better. One of the many things products that the nanotechnology field has given to us is the polymer nanocomposite and their foams. This foam has a greater value than traditional plastic foams, since…
  • College: College of Engineering (COE)
  • Inventors: Lee, L James; Chiu, Debbie Yven; Fu, Dajiong; Li, Dachao; Yen, Ying-Chieh
  • Licensing Officer: Zinn, Ryan

Gas Chromotography TCD Hydrogen Calibration Valve
TS-036946 — An in-line valve designed specifically to direct the flow of gasses within a gas chromotography machine.
Current metallurgy research requires a hydrogen measurement device to quantify the amount of hydrogen in a weld and the diffusion rate of hydrogen after failure to analyze the effects hydrogen assisted cracking. With this information, research groups can evaluate the performance of various welds a…
  • College: College of Engineering (COE)
  • Inventors: Wildofsky, Jacob; Alexandrov, Boian; Copley, Kenneth
  • Licensing Officer: Zinn, Ryan

System for Measuring Nitric Oxide in Breath Vapor
TS-030498 — A novel system that selectively detects nitric oxide and generates a voltage indicating the measured amount.
Nitric oxide plays an important role in the biological system of living organisms. Nitiric oxide has been shown to regulate and mediate numerous processes in the nervous, immune, and cardiovascular systems by transmitting signals throughout the body. It is used within the cardiovascular system to …
  • College: College of Arts & Sciences
  • Inventors: Dutta, Prabir; Mondal, Suvra
  • Licensing Officer: Zinn, Ryan

Low temperature oxidation of carbon monoxide on Co/ZrO2 catalysts
TS-015047 — Catalytic conversion of carbon monoxide to carbon dioxide.
Air pollution is a serious global problem and has received a great deal of attention over the last few decades. Industrial plants and automobiles release a significant amount of pollution into the atmosphere, principally in the form of unburned or partially burned fossil fuels, carbon monoxide, ni…
  • College: College of Engineering (COE)
  • Inventors: Ozkan, Umit; Holmgreen, Erik; Yung, Matthew
  • Licensing Officer: Zinn, Ryan

Synthesis of Hydrogen Gas
TS-014807 — Production of Hydrogen gas using economical and environmentally friendly catalysts.
Stable and reusable catalysts improve the efficiency of industrial scale material production. However, hexavalent Chromium (VI) and other common catalysts are known to cause various health effects. Furthermore, there are substantial risks associated with greater concentrations of chromium in the w…
  • College: College of Engineering (COE)
  • Inventors: Ozkan, Umit; Natesakhawat, Sittichai; Wang, Xueqin; Zhang, Lingzhi
  • Licensing Officer: Zinn, Ryan

Loading icon