# of Displayed Technologies: 9 / 9

Applied Category Filter (Click To Remove): Polymers & Membranes


Categories

Electrocatalytic grafting and modification of polyvinylchlorides and chloroparaffins
TS-064268 — Polyvinylchloride (PVC) is a widely used plastic, but its inherent limitations—brittleness, thermal instability, and poor shear strength—pose significant challenges for diverse applications, from medical packaging to construction. Conventional PVC modification relies on high loadings o…
  • College: College of Arts & Sciences
  • Inventors: Sevov, Christo; Truesdell, Blaise
  • Licensing Officer: Panic, Ana

Novel functional surfaces for chemical reaction and water treatment
TS-063135 — A liquid crystal infused porous surface for diagnosing and treating wastewater.
In various industries, there is a growing need for surfaces that can effectively repel water and resist fouling by oily contaminants. Traditional superhydrophobic surfaces, while excellent at repelling water, are easily fouled, limiting their practical applications. A team of The Ohio State Uni…
  • College: College of Engineering (COE)
  • Inventors: Wang, Xiaoguang; Rather, Adil; Xu, Yang
  • Licensing Officer: Randhawa, Davinder

Porous inorganic-organic material for removal of trace carbon dioxide from air or other gas streams
TS-059305 — A novel method in which nucleophilic transition metal hydroxide groups are generated at the internal pore surfaces of MOFs to facilitate selective gas-phase CO2 fixation at low pressures via formation of metal bicarbonate species.
Metal-organic frameworks (MOFs) are porous polymers constructed by self-assembly of organic and inorganic components. They have been extensively studied for gas storage and separation applications, and post-combustion CO2 capture under flue gas conditions has been a particularly intense area of st…
  • College: College of Arts & Sciences
  • Inventors: Wade, Casey; Bien, Caitlin; Cai, Zhongzheng
  • Licensing Officer: Dahlman, Jason "Jay"

Development of a Single Component Methacrylate Adhesive Formulation
TS-042066 — A novel hybrid adhesive that combines the non-toxic, high strength properties of methacrylate adhesives with the bonding characteristics of polyurethanes
Despite the utility of methacrylate adhesive chemistry, applications have been limited to industrial and biomedical use cases. This is due to the curing mechanism, which is initiated by either heat, light or a two-component redox system. This invention describes two strategies to create a single-c…
  • College: College of Arts & Sciences
  • Inventors: Parquette, Jonathan; Schricker, Scott
  • Licensing Officer: Dahlman, Jason "Jay"

Porous inorganic-organic material for removal of trace carbon dioxide from air or other gas streams
TS-041747 — Adsorbent for carbon dioxide capture with low energy input for regeneration, and high adsorption capacity
46% of 2010 global greenhouse gas emissions came from electricity and heat production, or from fossil fuels burned for industrial use (EPA). A lot of effort has been put into research on CO2 capture by adsorbents or absorbents, in order to reduce these greenhouse gas emissions. Additionally, effec…
  • College: College of Arts & Sciences
  • Inventors: Wade, Casey; Bien, Caitlin
  • Licensing Officer: Dahlman, Jason "Jay"

Development of Non-Foaming High Strength, Single Component Methacrylate/Polyurethane Adhesive
TS-037956 — A single component, moisture-cured methacrylate/polyurethane hybrid adhesive that combines the non-toxic, high strength properties of methacrylate adhesives with the bonding characteristics of polyurethanes
Methacrylate adhesives are strong and can be used on similar or dissimilar materials, such as plastic, metal, composites, and ceramic. They have excellent peel strength, resist abrasion, and stand up to a fair range of temperatures. They also require little preparation of the surfaces to be bonded…
  • College: College of Arts & Sciences
  • Inventors: Parquette, Jonathan; Bewick, Nicholas; Schricker, Scott
  • Licensing Officer: Dahlman, Jason "Jay"

Liquid-impregnated porous polypropylene surfaces for liquid repellency
TS-037943 — A new way to make a liquid-impregnated porous polypropylene surfaces, that is more durable and cost effective.
Polypropylene is one of the most commonly used plastic material for consumer packaging. It is also used in many other things, like textiles, stationary, plastic parts, and many other things. When used as packaging, there are a few problems that need to be addressed, and one of them is that it is n…
  • College: College of Engineering (COE)
  • Inventors: Bhushan, Bharat; Brown, Philip
  • Licensing Officer: Zinn, Ryan

Superoleophobic Polymer Surfaces Prepared by Nanoparticle Incorporation
TS-037495 — A technique to entrap SiO2 particles in polycarboante, creating a superoleophobic surface.
Superoleophobic surfaces have a number of advantages including anti­fouling, self-cleaning, anti-smudge, and low-drag. These applications are useful in a number of industries including medical, transportation, aerospace, energy, and construction. Current techniques for creating superoleophobic…
  • College: College of Engineering (COE)
  • Inventors: Bhushan, Bharat; Brown, Philip
  • Licensing Officer: Zinn, Ryan

Simulcure Technique - Fabrication and Preparation of Structural Composites
TS-014977 — A fabrication technique to prepare a composite structure with sensor elements distributed in 3-D space for visualizing stress distribution.
Trends in home automation, wearable electronics, and autonomous vehicles have created networked ecosystems, in which computers coexist and play a critical role. In these ecosystems, sensors provide necessary inputs to monitor the environment and take situation-specific action. Currently, sensors a…
  • College: College of Engineering (COE)
  • Inventors: Sundaresan, Vishnu Baba
  • Licensing Officer: Randhawa, Davinder

Loading icon