# of Displayed Technologies: 10 / 19

Applied Category Filter (Click To Remove): Metals/Alloys


Categories

Induction-Based Hot End for Affordable 3D Metal Printing
TS-070330 — The Need The prohibitive cost of consumer-grade 3D metal printers (e.g. AOMetal’s desktop device starting at $59,000 USD), places them far beyond the reach of most hobbyists, educators, and researchers. Thus, there is a significant need for an affordable, energy-efficient solution that enables…
  • College: Marion Campus
  • Inventors: Schinker, Isaac
  • Licensing Officer: Zinn, Ryan

Novel Hydrothermal Cathode Nanoparticle Synthesis Method for Fast-Charging Batteries
TS-070308 — The Need Current lithium iron phosphate (LFP) cathode materials suffer from poor electronic conductivity and limited lithium-ion diffusion, especially under high-rate charging conditions. These limitations hinder the performance of lithium-ion batteries (LiBs) in demanding applications such as elect…
  • College: College of Engineering (COE)
  • Inventors: Kim, Jung Hyun; Sayre, Jay; Singavarapu, Lakshmi Surag; Yap, Jun Wei
  • Licensing Officer: Randhawa, Davinder

Fast-Charging Silicon-Graphene Anodes for Durable Lithium-Ion Batteries
TS-070307 — The Need The rapid growth of electric vehicles and portable electronics demands lithium-ion batteries (LIBs) that support fast charging without compromising cycle life or safety. Silicon anodes offer high theoretical capacity but suffer from severe volume expansion during cycling, leading to mechani…
  • College: College of Engineering (COE)
  • Inventors: Jang, Dawoon; Kim, Jung Hyun; Yap, Jun Wei
  • Licensing Officer: Randhawa, Davinder

Intermediate Steel Alloy for Joining Steel to Aluminum
TS-069805 — The Need Welding or bonding steel to aluminum is challenging due to the formation of brittle Fe-Al intermetallic compounds, which weaken the joints. Current methods require alternative, costly joining processes. There is a critical need for a solution that allows the use of traditional welding tech…
  • College: College of Engineering (COE)
  • Inventors: Zhang, Wei; Walker, Luke
  • Licensing Officer: Zinn, Ryan

Elastocloric Dehumidifier for Atmospheric Water Harvesting
TS-069524 — The Need Global water scarcity is a critical issue, with many regions lacking access to clean and reliable water sources. Traditional water harvesting methods are often energy-intensive and inefficient. There is a pressing need for innovative, sustainable, and energy-efficient technologies to extra…
  • College: College of Engineering (COE)
  • Inventors: LaRocco, John; Simonis, John; Tahmina, Qudsia
  • Licensing Officer: Randhawa, Davinder

Computational Design of Experiment Framework for Processing of Metal Alloys
TS-067792 — A software tool for optimizing the manufacturing process for metal alloys.
Metallic alloys are composed of a homogeneous mixture of two or more metals or of metals and nonmetal or metalloid elements to provide specific characteristics or structural properties. Alloys are used in many applications, such as aircraft, offshore drilling, automobiles, and others. Obtaining t…
  • College: College of Engineering (COE)
  • Inventors: Alexandrov, Boian; Forquer, Matthew; Jang, Eun; Luo, Yuxiang; Stewart, Jeffrey
  • Licensing Officer: Zinn, Ryan

Use of Cerium in Neutralizing Iron Impurity in Aluminum Alloys
TS-065429 — Iron is the main and most detrimental impurity in most industrial casting aluminum alloys. Iron content in aluminum alloys is limited, up to 0.1 weight% in some alloys.
Iron is a major impurity element in primary and secondary (scrap) aluminum alloys. It is difficult to remove during melting and casting. Controlling the formation of Al-Fe-based intermetallics via alloying is key to leveraging the mechanical properties of aluminum alloy products. The current struc…
  • College: College of Engineering (COE)
  • Inventors: Luo, Alan; Cinkilic, Emre; Moodispaw, Michael
  • Licensing Officer: Zinn, Ryan

Metalloproteins as a tunable scaffold for constructing quantum bits and dits for use in quantum information storage and processing
TS-064827 — The Need: As the second quantum revolution progresses, the demand for robust quantum materials intensifies, particularly in the realm of quantum computation and information processing. Addressing the challenges of coherence and stability in qubits is crucial for advancing quantum technology towards …
  • College: College of Arts & Sciences
  • Inventors: Shafaat, Hannah "Hannah"; Johnston-Halperin, Ezekiel; Teptarakulkarn, Pathorn
  • Licensing Officer: Dahlman, Jason "Jay"

Three-dimensional cellular automation codes for solidification microstructure and porosity simulation of multi-component alloys
TS-063911 — Porosity formation during the solidification of aluminum-based alloys, induced by hydrogen gas and alloy shrinkage, presents a significant challenge for industries relying on high-performance solidification products such as castings, welds, and additively manufactured components. This issue advers…
  • College: College of Engineering (COE)
  • Inventors: Luo, Alan; Gu, Cheng
  • Licensing Officer: Zinn, Ryan

High-entropy AlCrTiV alloys
TS-063365 — Experience the future of materials technology with our high-entropy AlCrTiV metal alloy—a revolutionary solution that reshapes the possibilities in engineering and manufacturing. Elevate your products to new heights of performance, efficiency, and sustainability with our innovative alloy. For a closely related technology, please visit https://oied.osu.edu/find-technologies and type "T2021-261" in the search field.
In various industries, from aerospace to manufacturing, the pursuit of materials with exceptional mechanical properties coupled with low weight is unending. Conventional alloys often trade off one aspect for another, leaving a gap in the market for a metal alloy that seamlessly integrates strength…
  • College: College of Engineering (COE)
  • Inventors: Luo, Alan; Huang, Xuejun; Sun, Weihua
  • Licensing Officer: Zinn, Ryan

Show More Technologies

Loading icon