# of Displayed Technologies: 10 / 20


Categories

3DScope: Detecting 3D Model Clones
TS-057129 — Algorithm for extracting 3D models, indexing them using a value-insensitive normalization algorithm, and comparing the model indexes to detect cloned 3D models.
The unauthorized copying of 3D models robs designers of property, reduces innovation going into the creation of 3D models, creates liability for entities unknowingly using copied models, and indicates a lapse in IP security. With the vast amount of 3D assets in use, it is infeasible for humans to …
  • College: College of Engineering (COE)
  • Inventors: Zuo, Chaoshun; LIN, ZHIQIANG
  • Licensing Officer: Ashouripashaki, Mandana

Mobile Harmful Contaminant Detection System: Home Health Kit for the detection of Allergens, Chemicals and Viruses
TS-052249 — A tool for simply and affordably assessing levels of certain household allergens (including asthma triggers), chemical contaminants (formaldehyde) and viruses (including SARS-CoV-2).
The Need Household allergens (including Asthma triggers) Asthma is one of the most common chronic conditions among children in the United States and a major cause of childhood disability. Despite advances in medical treatment, many children have poor asthma control that results in disruptions in s…
  • College: College of Engineering (COE)
  • Inventors: Dannemiller, Karen; Parquette, Jonathan; Qin, Rongjun
  • Licensing Officer: Ashouripashaki, Mandana

Modular Dc Circuit Breaker with Integrated Energy Storage for Future Dc Networks
TS-051200 — Traditional AC distribution is not suitable for a wide range of applications in regard to efficiency, cost, and power carrying capacity compared to alternative distributions. Low voltage distribution suffers from high transmission losses due to higher current requirements necessitating thicker, he…
  • College: College of Engineering (COE)
  • Inventors: Wang, Jin; Na, Risha; Zhang, Yue
  • Licensing Officer: Ashouripashaki, Mandana

A Lightweight Low Inductance Power Module with Insulated Baseplates
TS-048588 — A lightweight power module that reduces loop stray inductance while maintaining good electrical insulation and thermal dissipation.
In conventional power module structures, the die is attached to the substrate, usually direct bonding copper (DBC). The ceramic substrate layer provides electrical insulation between the circuit and cooling structure and attaches to a conductive baseplate material (Cu, Al, AlSiC) to dissipate heat…
  • College: College of Engineering (COE)
  • Inventors: Lyu, Xintong; Wang, Jin
  • Licensing Officer: Ashouripashaki, Mandana

Antennae and sensor impregnated mat to monitor biological variables and indicators of health
TS-041742 — A functional fabric mat with the capability to monitor and track anthropometric and biofeedback data accompanied by an application to integrate information and securely share with healthcare providers.
Currently, anthropometric and biological measurements in the healthcare setting are made with individual devices that require both specialized equipment and time on the part of the patient and healthcare provider. Additionally, patient data is often static in nature as the opportunity for measurem…
  • College: College of Nursing
  • Inventors: Militello, Lisa; Kiourti, Asimina
  • Licensing Officer: Ashouripashaki, Mandana

Iron Oxide Composites with Low Concentration of Aliovalent Dopants As Oxygen Carrier Materials for Sustainable Redox Combustion and Gasification Reactions in Chemical Looping Reactor Systems
TS-038513 — Addition of low concentration aliovalent transition metal dopants substantially improves particle performance in chemical loopiong systems
Cyclic systems are required for energy conversion systems. In the clean energy industry, chemical looping offers promise for carbon dioxide capture from fossil energy. Transition metal oxides such as iron oxide, nickel oxide, and copper oxide have been singled out as the desired active oxygen carr…
  • College: College of Engineering (COE)
  • Inventors: Fan, Liang-Shih; Cheng, Zhuo; Chung, Cheng; Guo, Mengqing "MENGQING"; Qin, Lang
  • Licensing Officer: Ashouripashaki, Mandana

Power Harvesting From Fabric Electrochemistry
TS-037500 — A new method of power harvesting based on electroceutical dressings dampened by a saline solution.
On-­body electronics, such as wearable and epidermal sensors, are experiencing significant growth. One of the biggest challenges of on-­body electronics is the development or identification of a sufficient power source. To address the former concern, sensors are becoming available with eve…
  • College: College of Medicine (COM)
  • Inventors: Sen, Chandan; Das Ghatak, Piya; Kiourti, Asimina; Steiner, Shomita; Vilkhu, Ramandeep
  • Licensing Officer: Ashouripashaki, Mandana

Amine-Containing Membranes Incorporated with Carbon Nanotubes or CO2 Separation
TS-037297 — A novel amine-containing membrane incorporated with carbon nanotubes for CO2/N2 separation with a vacuum pulled on the permeate side
CO2 concentration in the atmosphere has surpassed 400 ppm in the past decade. The combustion of fossil fuels is a major contributor to the large amount of CO2 emission, and membrane technologies have been suggested as a promising approach to capture CO2 from large stationary sources (e.g., flue ga…
  • College: College of Engineering (COE)
  • Inventors: Ho, W.S. Winston; Han, Yang
  • Licensing Officer: Ashouripashaki, Mandana

A Voltage Divider based Auxiliary Power Unit for Power Electronic Converters
TS-035666 — A more reliable, less complex, and cost effective concept for providing auxiliary power to high voltage electronic converters without external power sources.
Power electronic converters need a certain type of auxiliary power unit to provide electric power to their controllers, gate-driving circuits and/or sensors. For power electronic converters used in high voltage systems, the auxiliary power unit is difficult to design and fabricate due to massive e…
  • College: College of Engineering (COE)
  • Inventors: Wang, Jin; Hu, Boxue; Li, He
  • Licensing Officer: Ashouripashaki, Mandana

Borate-Containing Membranes for Gas Separation
TS-032351 — Highly efficient membranes that can facilitate effective carbon dioxide capture that can be used to purify industrial gases such as natural gas, syngas, and hydrogen
Membranes are a cost-effective and energy-efficient solution for the separation of carbon dioxide from methane and industrial flue gas. In addition, membranes are utilized to purify hydrogen and syngas. Increased global utilization of natural gas has necessitated efficient natural gas purification…
  • College: College of Engineering (COE)
  • Inventors: Ho, W.S. Winston; Salim, Witopo; Vakharia, Varun
  • Licensing Officer: Ashouripashaki, Mandana

Show More Technologies

Loading icon