TS-063283 — As the adoption of electric vehicles (EVs) becomes more widespread, there is an increasing emphasis on improving charging technologies. There is substantial commercial need for technologies that sit on-board EVs, enhancing charging efficiency and reducing mechanical complexity. The Ohio State U…

TS-063156 — In the era of 5G and beyond, wireless base station infrastructures require power amplifiers (PAs) that maintain high efficiency from backoff to peak power level. Conventional Doherty PAs, while popular, are inherently narrowband due to their reliance on a quarter-wave transmission line (TL). This …

TS-063155 — With the rapid growth in modern communication, transmitter systems must use a wider fraction of the spectrum, to support the continuously increasing data rate. In addition, signals with large peak-to-average power ratio (PAPR) are used in communication systems to increase the spectral efficiency. …

TS-063148 — In an era of rapid growth in modern communication, there is an increasing demand for multi-band and broadband power amplifiers (PA) for signals with large peak-to-average power ratio (PAPR). The PA, being one of the most power-consuming components in a transmitter system, needs to achieve high ave…

TS-063058 — The Need In the era of electrified vehicles, there is a growing demand for efficient power systems that can provide high voltage and/or high output power to meet strict design requirements. These power systems also need to supply power to other equipment and circuits, such as DC-DC converters, on-b…

TS-062503 — Hybrid engines are at the forefront of clean transportation technology. Thus far hybrid power-trains have been implemented primarily to improve the fuel efficiency of already economical passenger cars, leaving a void between clean energy and high performance vehicles. The integration of hybrid tec…

TS-062498 — Novel integrated inductor-based magnetohydrodynamic (MHD) pumps containing liquid metal coolant significantly enhance the thermal management of large-scale, complex electronic systems housed in confined spaces

TS-062494 — A novel magnetohydrodynamic (MHD) pump-based thermal management system design where integration of the cooling apparatus using electronic circuit interconnections achieves improved thermal management at a lower cost.

TS-062489 — Biosensors are a powerful and emerging technology capable of measuring the presence and concentration of molecules inside the human body. These devices are based on the premise that the physiology of diseased tissue is substantially different from that of healthy tissue and can be used to diagnose a…

TS-062483 — Measurement/detection of analytes (e.g., biomarkers) in different environments (e.g., biofluids/organs) is typically performed using a biosensor. Available bio-integrated sensors do not provide the capability to map biomarker concentrations, require a power source to function, use a limited number of electrodes, and normally can only measure a specific type of biofluid but not others. The use of glutamate mapping technology (radioactive or fluorescent ligand bound to a glutamate receptor) has been evaluated and found to require bulky/expensive medical equipment, a power source for measurement, cannot be miniaturized or integrated into a bio tissue, and require patients to be stationary during measurement.

TS-061832 — A portable and lightweight readout circuit designed for use with LRC-based wireless sensors and in conjunction with other commonly used devices (e.g., smartphone, laptop, and tablet)

TS-058251 — Diagnostic tools are key to medicine, research and diagnostics. The measurement of biomolecules and their absorption kinetics can facilitate a better understanding of drug intake, biological responses, or in the continuous monitoring of specimen. Current equipment requires centralized equipment, t…

TS-052249 — A tool for simply and affordably assessing levels of certain household allergens (including asthma triggers), chemical contaminants (formaldehyde) and viruses (including SARS-CoV-2).

TS-051200 — Traditional AC distribution is not suitable for a wide range of applications in regard to efficiency, cost, and power carrying capacity compared to alternative distributions. Low voltage distribution suffers from high transmission losses due to higher current requirements necessitating thicker, he…

TS-048641 — A method of authenticating an IC die’s origin and uniquely identifying each die with an intrinsic unclonable value through measurement of on-chip capacitance values

TS-048588 — A lightweight power module that reduces loop stray inductance while maintaining good electrical insulation and thermal dissipation.

TS-041784 — A tool for simply and affordably assessing levels of certain household allergens and asthma triggers.

TS-038513 — Addition of low concentration aliovalent transition metal dopants substantially improves particle performance in chemical loopiong systems

TS-037841 — A modular and non-invasive ECVT sensor that can be adapted and scaled to vessel demands.

TS-037590 — A two-stage process that can utilize a number of solid, liquid, or gaseous carbon-based fuels to produce hydrogen gas