TS-065135 — The use of wearable health devices has more than tripled in recent years due to the ability of these products to collect health data to detect potential health events (e.g., heart attacks), manage chronic diseases, and track physical activity. Wearable technologies have been shown to decrease the nu…

TS-063961 — The Need In the realm of power device technologies, addressing the growing demand for efficient, high-performance semiconductors is paramount. The current gap in the availability of a p-type β-Ga2O3 semiconductor poses a significant challenge, hindering the progress of device fabrication metho…

TS-063784 — The Need In the realm of power electronics, the industry is seeking advanced semiconductor materials that can address the ever-growing demand for high power density and high-frequency applications. Beta phase gallium oxide (β-Ga2O3) with an ultrawide bandgap (UWBG) of approximately 4.8 eV emer…

TS-063717 — The Need In the world of semiconductor material systems, the demand for advancements in optoelectronic and power electronic devices is ever-growing. The fabrication of semiconductor films, crucial for these applications, primarily relies on epitaxy technologies such as hydride vapor phase epitaxy (…

TS-063051 — A stand-off gas detection system with active, laser-based sensing and imaging capabilities for commercial use

TS-062951 — The Need In today's fast-paced technological landscape, there is an ever-growing demand for high-performance vertical power devices with enhanced breakdown voltage capabilities, exceeding 20 kV. Meeting this commercial need requires an innovative approach to semiconductor drift layer developmen…

TS-062893 — A room temperature, ultra-high gain (M=278, λ=1550 nm, V=69.5 V, T=296 K) linear mode avalanche photodiode (APD) on an InP substrate using a GaAs0.5Sb0.5/Al0.85Ga0.15As0.56Sb0.44 separate absorption charge and multiplication (SACM) heterostructure.

TS-062892 — A room temperature, ultra-high gain (M=278, λ=1550 nm, V=69.5 V, T=296 K) linear mode avalanche photodiode (APD) on an InP substrate using a GaAs0.5Sb0.5/Al0.85Ga0.15As0.56Sb0.44 separate absorption charge and multiplication (SACM) heterostructure.

TS-062847 — Avalanche photodiodes (APDs) that target a wavelength of 1550 nm have several applications ranging from optical communications to imaging to single photon detection. There is increasing interest in APDs for longer wavelengths. A distinctive feature of an APD is high sensitivity due to the gain ach…

TS-061850 — High-quality beta-gallium oxide (β-Ga2O3) based semi-insulating layers enable high power/high-frequency electronics, ultraviolet optoelectronics, and more.

TS-061767 — Current semiconductor materials used in power devices are reaching their performance limits. Inventors at OSU have developed a new method of fabricating thick β-(AlxGa1-x)2O3 films to enable low-Al content. The result is a lower cost of production and the ability to support next-generation optoelectronic and high-power device applications.

TS-057127 — Achieving high efficiency LEDs with green, amber and longer wavelengths using III-nitride/II-IV-nitride heterostructures as the active media.

TS-050244 — A design of scalable laser-assisted MOCVD chamber for III-nitrides and other semiconductors with a laser array input.

TS-042441 — The quantum well design is incorporated within a red-emitting InGaN QW LED, an LED type that usually cannot efficiently emit wavelengths larger than blue/green. The LED can be incorporated into a same-material RGB platform for white LEDs, because the well design increases efficiency and decreases indium composition compared to similar wavelength InGaN LEDs.

TS-037500 — A new method of power harvesting based on electroceutical dressings dampened by a saline solution.

TS-014977 — A fabrication technique to prepare a composite structure with sensor elements distributed in 3-D space for visualizing stress distribution.

TS-014971 — A new process to fabricate stretchable and flexible wire antennas with conductive fibers (E-fibers)