Topological Surface State-Based Thermal Switch
TS-070531 — The Need
Efficient heat switches are crucial for various applications, including solid-state refrigeration, solar thermal installations, waste heat scavenging, and electronics cooling. Current technologies often suffer from irreversible thermodynamic losses or inefficiencies, limiting their effectiv…
- College: College
of
Engineering
(COE)
- Inventors: Heremans, Joseph; Kang, Joon Sang; kim, Min Young
- Licensing Officer: Zinn, Ryan
Smart Liquid Crystal Sensor for Real-Time Shear Flow Visualization
TS-070520 — The Need
Accurate, real-time mapping of shear forces in fluid environments remains a challenge, particularly in applications requiring passive, non-invasive, and long-term monitoring. Existing technologies often rely on active sensors that require power, are difficult to integrate into sensitive sys…
- College: College
of
Engineering
(COE)
- Inventors: Wang, Xiaoguang "William"; Chen, Boyuan; Kara, Ufuoma; Weible, Alan
- Licensing Officer: Randhawa, Davinder
Novel Hydrothermal Cathode Nanoparticle Synthesis Method for Fast-Charging Batteries
TS-070308 — The Need
Current lithium iron phosphate (LFP) cathode materials suffer from poor electronic conductivity and limited lithium-ion diffusion, especially under high-rate charging conditions. These limitations hinder the performance of lithium-ion batteries (LiBs) in demanding applications such as elect…
- College: College
of
Engineering
(COE)
- Inventors: Kim, Jung Hyun; Sayre, Jay; Singavarapu, Lakshmi Surag; Yap, Jun Wei
- Licensing Officer: Randhawa, Davinder
Fast-Charging Silicon-Graphene Anodes for Durable Lithium-Ion Batteries
TS-070307 — The Need
The rapid growth of electric vehicles and portable electronics demands lithium-ion batteries (LIBs) that support fast charging without compromising cycle life or safety. Silicon anodes offer high theoretical capacity but suffer from severe volume expansion during cycling, leading to mechani…
- College: College
of
Engineering
(COE)
- Inventors: Jang, Dawoon; Kim, Jung Hyun; Yap, Jun Wei
- Licensing Officer: Randhawa, Davinder
Wearable Muscle Atrophy Sensor
TS-070305 — The Need
Muscle atrophy significantly impacts quality of life in patients with critical illness, chronic disease, aging, and even spaceflight. Current gold-standard diagnostic tools such as MRI, CT, and ultrasound are expensive, operator-dependent, and impractical for routine or home-based monitorin…
- College: College
of
Engineering
(COE)
- Inventors: Kiourti, Asimina; Rice, Allyanna
- Licensing Officer: Randhawa, Davinder
Next-Gen 3D Nanostructures for Solar-Powered Chemical Processes
TS-070030 — The Need
Current photocatalytic technologies often require UV light for activation, limiting their efficiency and applicability under natural sunlight. Additionally, the short lifespan of photogenerated electrons and holes in TiO₂ nanoparticles hinders effective utilization. There is a need for a…
- College: College
of
Engineering
(COE)
- Inventors: Gouma, Pelagia "Perena"
- Licensing Officer: Randhawa, Davinder
Intermediate Steel Alloy for Joining Steel to Aluminum
TS-069805 — The Need
Welding or bonding steel to aluminum is challenging due to the formation of brittle Fe-Al intermetallic compounds, which weaken the joints. Current methods require alternative, costly joining processes. There is a critical need for a solution that allows the use of traditional welding tech…
- College: College
of
Engineering
(COE)
- Inventors: Zhang, Wei; Walker, Luke
- Licensing Officer: Zinn, Ryan
Bulk Ferroelectric Thermal Switch
TS-069780 — The Need
Efficient thermal management is crucial in various industries, yet current solutions often fall short in terms of performance and adaptability. There is a significant need for a technology that can effectively control heat flow in bulk materials, enhancing the efficiency of systems ranging…
- College: College
of
Engineering
(COE)
- Inventors: Heremans, Joseph; Wooten, Brandi
- Licensing Officer: Zinn, Ryan
3-Stage Membrane Processes for CO2 Capture from Flue Gases
TS-069650 — The Need
The urgent need to mitigate climate change has driven the demand for efficient carbon capture technologies. Current methods often fall short in achieving high capture rates and purity levels, especially for industrial applications. This technology addresses the critical need for a scalable…
- College: College
of
Engineering
(COE)
- Inventors: Han, Yang; Ho, W.S. Winston
- Licensing Officer: Ashouripashaki, Mandana
Elastocloric Dehumidifier for Atmospheric Water Harvesting
TS-069524 — The Need
Global water scarcity is a critical issue, with many regions lacking access to clean and reliable water sources. Traditional water harvesting methods are often energy-intensive and inefficient. There is a pressing need for innovative, sustainable, and energy-efficient technologies to extra…
- College: College
of
Engineering
(COE)
- Inventors: LaRocco, John; Simonis, John; Tahmina, Qudsia
- Licensing Officer: Randhawa, Davinder
Enhanced Butanol Production via Engineered Clostridium Strains
TS-069522 — The Need
The biofuel and biochemical industries face challenges in efficiently converting fermentation byproducts, such as butyrate, into higher-value products like butanol. Traditional methods often result in the accumulation of waste products, limiting overall process efficiency and economic viab…
- College: College
of
Engineering
(COE)
- Inventors: Moore, Curtis; Yang, Shang-Tian "ST"
- Licensing Officer: Randhawa, Davinder
Novel Efficient Butanol Production without CO2 Emission
TS-068795 —
The Need
Renewable energy resources have gained global interest due to environmental issues, climate change, oil price and supply volatility, and decreasing nonrenewable fossil fuel sources. Butanol is a biofuel alternative that can provide a higher heating value, lower volatility, polarity, cor…
- College: College
of
Engineering
(COE)
- Inventors: Yang, Shang-Tian "ST"
- Licensing Officer: Randhawa, Davinder
Methods to produce high purity tritium gas
TS-067793 — The technology is a device and method for producing high purity tritium gas by irradiating a lithium composition within a gas cell that selectively allows tritium to diffuse while blocking other byproducts, ensuring efficient and direct collection
of pure tritium without extensive purification. This system is designed to enhance the purity, efficiency, and scalability
of tritium production for various industrial and research applications.
The production of high purity tritium gas is critical for applications in nuclear fusion, radioluminescent devices, and scientific research. Current methods for tritium production often result in contaminants like helium and other gases, requiring additional purification processes that are costly …
- College: College
of
Engineering
(COE)
- Inventors: Cao, Lei Raymond; Van Zile, Matthew
- Licensing Officer: Zinn, Ryan
Computational Design of Experiment Framework for Processing of Metal Alloys
TS-067792 — A s
oftware tool for optimizing the manufacturing process for metal alloys.
Metallic alloys are composed of a homogeneous mixture of two or more metals or of metals and nonmetal or metalloid elements to provide specific characteristics or structural properties. Alloys are used in many applications, such as aircraft, offshore drilling, automobiles, and others.
Obtaining t…
- College: College
of
Engineering
(COE)
- Inventors: Alexandrov, Boian; Forquer, Matthew; Jang, Eun; Luo, Yuxiang; Stewart, Jeffrey
- Licensing Officer: Zinn, Ryan
Endoscopic additive manufacturing of conductors and wireless implants
TS-067045 — The Need
Wireless implants with integrated antennas are highly desirable for diagnostic, therapeutic, and monitoring applications due to their ability to communicate directly with external devices. However, the need for major surgical incisions to implant these devices poses significant risks, incl…
- College: College
of
Engineering
(COE)
- Inventors: Kiourti, Asimina; Dontha, Balaji; Hoelzle, David; Li, Jinghua; Moulod, Mohammad
- Licensing Officer: Randhawa, Davinder
Innovative Solutions for Cell Viability and Targeted Delivery
TS-066100 — Research tool to transfect cells ex vivo using electroporation through electrospun core-shell fibers for research applications
The Need:
Conventional electroporation methods often result in low cell viability due to heat generation, especially when working with primary cells. These methods also face challenges with non-specific transport of molecules, high vector integration rates leading to mutagenesis, and inefficacy in …
- College: College
of
Engineering
(COE)
- Inventors: Gallego Perez, Daniel; Das, Devleena; Duarte Sanmiguel, Silvia; Higuita Castro, Natalia
- Licensing Officer: Willson, Christopher
Use of Cerium in Neutralizing Iron Impurity in Aluminum Alloys
TS-065429 — Iron is the main and most detrimental impurity in most industrial casting aluminum alloys. Iron content in aluminum alloys is limited, up to 0.1 weight% in some alloys.
Iron is a major impurity element in primary and secondary (scrap) aluminum alloys. It is difficult to remove during melting and casting. Controlling the formation of Al-Fe-based intermetallics via alloying is key to leveraging the mechanical properties of aluminum alloy products. The current struc…
- College: College
of
Engineering
(COE)
- Inventors: Luo, Alan; Cinkilic, Emre; Moodispaw, Michael
- Licensing Officer: Zinn, Ryan
Highly Efficient Light Olefin Selectivity & Production Process
TS-065422 — Light olefins, such as ethylene and propylene, are essential building blocks in the petrochemical industry and have a wide range
of uses in various applications. The most common uses for olefins include polymers, chemical intermediates, solvents, rubber, and nanomaterials, among others.
Although Light olefins are used globally in many products, the catalytic processes to produce them are energy intensive with a large carbon footprint and the production of greenhouse gases and water pollution. As a result, substantial efforts are being made in the industry to develop more sustain…
- College: College
of
Engineering
(COE)
- Inventors: Ozkan, Umit; Gunduz, Seval; Kim, Jaesung
- Licensing Officer: Zinn, Ryan
Show More Technologies