# of Displayed Technologies: 10 / 59

Applied Category Filter (Click To Remove): Engineering & Physical Sciences


Categories

SimPi: A Remote Power Platform for Simulation
TS-059056 — A platform for improving simulations across many industries. Developing real-life simulations of disasters is vital for safety and reducing their financial impact; however, current simulation tools are bulky, expensive to implement, and require advanced technical skills to operate.
Simulations are essential for evaluating the potential impacts of disasters and for creating effective preparedness and response plans to facilitate organized and coordinated actions. Since response plans are not theoretical exercises, they must frequently be tested to be evaluated, adapted, and u…
  • College: College of Medicine (COM)
  • Inventors: Winfield, Scott; Beck, James; Finnegan, Geoff
  • Licensing Officer: Csatary, Erika

Water treatment to eliminate cyanobacteria and other toxins by unmanned surface vehicles (USVs)
TS-058408 — Freshwater resources around the world are under stress due to naturally occurring events and human impacts, causing an increase in cyanobacteria blooms. These cyanobacteria release harmful toxins, known as cyanotoxins. The proposed USV degrades the toxins on-site with UV light, reducing the accumulation of toxins, preventing groundwater contamination, and improving water quality.
Treatment of cyanobacteria and cyanotoxins is necessary before they reach a critical point, or they can contaminate other environments. For example, waste produced by water treatment facilities serves as fertilizer for agricultural land, and if not properly treated, toxic cyanobacteria can grow in…
  • College: College of Public Health
  • Inventors: Lee, Jiyoung; Byrd, Kendall
  • Licensing Officer: Csatary, Erika

3DScope: Detecting 3D Model Clones
TS-057129 — Algorithm for extracting 3D models, indexing them using a value-insensitive normalization algorithm, and comparing the model indexes to detect cloned 3D models.
The unauthorized copying of 3D models robs designers of property, reduces innovation going into the creation of 3D models, creates liability for entities unknowingly using copied models, and indicates a lapse in IP security. With the vast amount of 3D assets in use, it is infeasible for humans to …
  • College: College of Engineering (COE)
  • Inventors: Zuo, Chaoshun; LIN, ZHIQIANG
  • Licensing Officer: Ashouripashaki, Mandana

High Efficiency LED Designs Using Quantum Well Engineering
TS-057127 — Achieving high efficiency LEDs with green, amber and longer wavelengths using III-nitride/II-IV-nitride heterostructures as the active media.
Although extensive research and development over the past two decades has resulted in close to 100% external quantum efficiency (EQE) of InGaN based blue light emitting devices, efficiency of the longer visible wavelength emitting devices has remained relatively low. Spontaneous polarization origi…
  • College: College of Engineering (COE)
  • Inventors: Zhao, Hongping; Zhang, Kaitian
  • Licensing Officer: Randhawa, Davinder

Micro-Resonator Design Implementing Internal Resonance for micro electro-mechanical systems (MEMS) Applications
TS-054917 — This invention ensures the consistent frequency of micro electro-mechanical system resonator-based oscillators by using a novel thin-layer stepped beam.
Computer processors are used every minute of every day in phones, cars, computers, TVs, and as the “Internet of Things” expands to refrigerators, toasters, and more processers define how we live our lives. These processors rely on mechanical oscillators and resonators that work togethe…
  • College: College of Engineering (COE)
  • Inventors: Cho, Han Na "Hanna"; Yu, Jun
  • Licensing Officer: Zinn, Ryan

Dynamic Removal of Clutter to Improve Situational Awareness in Traffic Management Systems
TS-054551 — Algorithm/software that dynamically classifies and removes clutter in systems such as the traffic management systems of Unmanned Aircraft Systems Traffic Management (UTM) and Urban Air Mobility (UAM).
The Unmanned Aerial Vehicle (UAV) market is predicted to be worth $56.18 billion by 2027. The global commercial UAV market size alone was valued at $13.44 billion in 2020, with a recorded demand of over 689,000 units. With a wide range of applications, the UAV market is expected to grow at 19.9% C…
  • College: College of Engineering (COE)
  • Inventors: Singhal, Achal
  • Licensing Officer: Zinn, Ryan

Drug Delivery System for the Treatment of Neurological Diseases
TS-054464 — Novel drug delivery system that enables efficient transfer of FDA-approved drugs for the treatment of neurological injuries.
Traumatic brain and spinal cord injury cause devastating neurological deficits and long-term disability due to detrimental structural and functional alteration in neuronal circuits. Treatment of brain injury and neurological disorders has traditionally been challenging due to the inability to deli…
  • College: College of Engineering (COE)
  • Inventors: Lannutti, John; Fan, Fan; Tedeschi, Andrea
  • Licensing Officer: Csatary, Erika

Enhancing the mechanical performance of resistance spot welding of aluminum alloys to steel using chromium-rich Interlayers
TS-054040 — This is a new method of resistance spot welding of aluminum alloy and advanced high strength steel that creates a stronger bond by using a chromium-rich interlayer. The interlayer improves joint strength, ductility, and toughness compared to traditional methods.
Resistance welding is used to combine two metals at one point. This technique is used extensively in automotive manufacturing, combining an aluminum (Al) to an advanced high strength steel (AHSS) structure. Welding Al and AHSS together directly, however, does not create a high-quality bond, due to…
  • College: College of Engineering (COE)
  • Inventors: Ramirez, Antonio; Lara, Bryan; Reghine Giorjao, Rafael Arthur
  • Licensing Officer: Zinn, Ryan

Method for aligning multiple lasers using axial sensor data.
TS-054019 — This technology improves the additive manufacturing process by aligning the multiple lasers to one reference point. The reference laser provides real time feedback to the other lasers thereby minimizing seam defects resulting in a higher quality print. .tb_button {padding:1px;cursor:pointer;border-right: 1px solid #8b8b8b;border-left: 1px solid #FFF;border-bottom: 1px solid #fff;}.tb_button.hover {borer:2px outset #def; background-color: #f8f8f8 !important;}.ws_toolbar {z-index:100000} .ws_toolbar .ws_tb_btn {cursor:pointer;border:1px solid #555;padding:3px} .tb_highlight{background-color:yellow} .tb_hide {visibility:hidden} .ws_toolbar img {padding:2px;margin:0px}
The additive manufacturing (AM) market has been steadily growing and has recently surpassed the $10 billion in market revenue. To keep up with this demand for less expensive, larger parts, users are turning to multi-laser machines to scale the technology. Each machine has a coordinate system w…
  • College: College of Engineering (COE)
  • Inventors: Rindler, Jacob
  • Licensing Officer: Zinn, Ryan

Ultrasonically assisted wire additive manufacturing process and apparatus
TS-054013 — The ultrasonically assisted wire additive manufacturing process and apparatus is a new innovation that uses power ultrasound (UA) for benefits in processing molten metals. The UA energy is directly applied in the local deposition pool, which makes this new hybrid process applicable for building parts with any size and geometry.
Additive manufacturing (AM) is the process of 3D printing for industrial use. Instead of countertop devices printing small toys from plastic, industrial AM is used on a much larger scale to create engine blocks, plane components, and many other products made of metal alloys. AM is traditionally do…
  • College: College of Engineering (COE)
  • Inventors: Liu, Xun; Pfeifer, Eddie "Ed"; Wang, Tianzhao
  • Licensing Officer: Zinn, Ryan

Show More Technologies

Loading icon