Available Technologies
# of Displayed Technologies: 10 / 14
Applied Category Filter (Click To Remove): Automotive
Novel Secondary Aluminum Alloys with Enhanced Impurity Tolerance
TS-071088 — The Need
The transportation industry increasingly relies on aluminum-silicon (Al-Si) casting alloys to reduce vehicle weight and emissions. However, structural applications demand high ductility and strict impurity limits, making them incompatible with most recycled aluminum. Current secondary alloy…
- College: College of Engineering (COE)
- Inventors: Luo, Alan; Moodispaw, Michael
- Licensing Officer: Ashouripashaki, Mandana
AI-Driven Intersection Safety System for Vulnerable Road User Protection
TS-070954 — The Need
Intersections are among the most dangerous areas on U.S. roadways, accounting for approximately 25% of traffic fatalities and nearly half of all injuries annually. Vulnerable Road Users (VRUs), including pedestrians and cyclists, face increasing risk due to complex traffic dynamics and limi…
- College: College of Engineering (COE)
- Inventors: Yurtsever, Ekim; Giuliani, Michele; Rizzoni, Giorgio
- Licensing Officer: Ashouripashaki, Mandana
Predictive V2X Torque Control for Multi-E-Axle EV Efficiency
TS-070632 — The Need
As electric vehicles (EVs) evolve toward multi-e-axle architectures, traditional energy management strategies fall short in optimizing power distribution and minimizing energy waste. Current systems lack the predictive intelligence to adapt to dynamic driving conditions, leading to suboptim…
- College: College of Engineering (COE)
- Inventors: Safder, Ahmad Hussain; Ahmed, Qadeer; Hanif, Athar
- Licensing Officer: Ashouripashaki, Mandana
Wind speed and direction measurement system
TS-063362 — Introducing our Low-Drag Smart Tether System—the future of fluid speed and direction measurement. Experience unmatched accuracy, energy efficiency, and reliability, revolutionizing how we perceive and utilize wind data in the modern age.
In the realm of aerial technology, the demand for accurate, low-cost wind monitors that are both scalable and efficient has never been higher. Traditional methods, such as pitot tubes and cup-and-vane anemometers, are marred by issues like icing vulnerability, high energy consumption, and unsuitab…
- College: College of Engineering (COE)
- Inventors: Dapino, Marcelo; Headings, Leon
- Licensing Officer: Ashouripashaki, Mandana
SimpleFill Gas Pressurization Device
TS-063346 — A reliable compact device for efficiently compressing natural gas fuel for automobiles
Compressed gas is useful in a number of different applications such as propulsion in vehicles. The global Compressed Natural Gas (CNG) market was valued at $14.8 billion in 2016, and is projected to reach $36 billion by 2023, growing at a CAGR of 14.1%. Furthermore, the Natural Gas Vehicle market …
- College: College of Engineering (COE)
- Inventors: Cantemir, Codrin; Canova, Marcello; Chiara, Fabio; Durand, James; Fly, Gerald; Triberti, Matteo; Underhill, Robert
- Licensing Officer: Zinn, Ryan
Ported shroud centrifugal compressor modification for reduced noise and improved efficiency
TS-063345 — An improvement to the design of ported shrouds for centrifugal compressor resulting in reduced noise and improved efficiency
Implementing a ported shroud casing treatment is often used to extend the operating range of a centrifugal compressor. A centrifugal compressor is used in an engine to increase the pressure of the air entering the engine. This allows the engine to burn more fuel and air, producing more power. Cent…
- College: College of Engineering (COE)
- Inventors: Dehner, Richard
- Licensing Officer: Ashouripashaki, Mandana
Vulnerability and Attackability analysis of automotive controllers using structural model of the system
TS-063239 — The Ohio State University has developed a vulnerability analysis technique for connected and autonomous vehicles that assesses the vulnerability and attackability of the automotive controllers to determine the security of the system.
The Need
Automated vehicle technologies improve safety, assis…
- College: College of Engineering (COE)
- Inventors: Renganathan, Vishnu; Ahmed, Qadeer
- Licensing Officer: Ashouripashaki, Mandana
System and Method of Securing Vehicle-Pavement Interaction (Tago)
TS-063169 —
Road safety is a paramount concern. Unpredictable road conditions, such as bumps and uneven surfaces, can pose significant risks to drivers. There is a pressing need for a technology that can sense and alert drivers about these road surface conditions in real-time, enhancing safety and improving t…
- College: College of Engineering (COE)
- Inventors: Athreya, Kannan; Sun, Wei
- Licensing Officer: Randhawa, Davinder
Dynamic Control Scheme for Multiphase Electric Machine
TS-063033 — The Need
As automobile manufacturers strive to achieve greater fuel efficiency and reduce emissions, the adoption of Electric Vehicles (EVs) and other Electric Drive Systems (EDSs) has surged. However, these electrified powertrains face performance challenges, especially in extreme environments. To…
- College: College of Engineering (COE)
- Inventors: Hanif, Athar; Ahmed, Qadeer
- Licensing Officer: Ashouripashaki, Mandana
SimpleFill Gas Pressurization Device
TS-054465 — A reliable compact device for efficiently compressing natural gas fuel for automobiles
Compressed gas is useful in a number of different applications such as propulsion in vehicles. The global Compressed Natural Gas (CNG) market was valued at $14.8 billion in 2016, and is projected to reach $36 billion by 2023, growing at a CAGR of 14.1%. Furthermore, the Natural Gas Vehicle market …
- College: College of Engineering (COE)
- Inventors: Chiara, Fabio; Canova, Marcello; Cantemir, Codrin; Durand, James; Fly, Gerald; Triberti, Matteo; Underhill, Robert
- Licensing Officer: Zinn, Ryan
