# of Displayed Technologies: 10 / 59

Applied Category Filter (Click To Remove): Engineering & Physical Sciences


Categories

Vehicle-in-Virtual-Environment Method for Autonomous Driving System Development and Evaluation
TS-054005 — This technology is a Vehicle-in-Virtual Environment (VVE) method for testing and evaluating Autonomous Vehicles (AV). The VVE approach is a safe, reliable, repetitive, and scalable method of testing AVs, decreasing the risks and costs of testing AVs on public roads.
The demand for autonomous vehicles continues to grow as companies and cities realize the effect on the costs, safety, and efficiency that AVs have on everyday lives. Initiatives such as MCity in Detroit, Michigan, and Smart City in Columbus, Ohio, show a strong commitment to the development of aut…
  • College: College of Engineering (COE)
  • Inventors: Guvenc, Levent; Aksun Guvenc, Bilin
  • Licensing Officer: Zinn, Ryan

Novel Electrode for Co-factor Regeneration
TS-051995 — Method of regenerating NADPH for the production of biobutanol.
The Need NAD(P)H is used as a reducing co-factor for the synthesis of biochemicals (e.g., conversion of aldehydes to alcohols) using biocatalysts or even microbes. Butanol is an important feedstock used in the chemical industry and shows great potential as a biofuel. Butanol is produced from fossil…
  • College: College of Engineering (COE)
  • Inventors: Kadowaki, Jonathan; Gopalan, Venkat; Jones, Travis; Sengupta, Anindita; Subramaniam, Vishwanath
  • Licensing Officer: Sita, Cordellia

Method for seamless joining and repair of metal parts using ultrasonic additive manufacturing
TS-050479 — This invention provides a method for repairing metal parts by removing and replacing worn, damaged, or defective metal material. It also serves as a method for seamlessly joining metal sheets and other parts while retaining the original temper of the joined parts. This technology, based on ultrasonic additive manufacturing (UAM), achieves strong joints and repairs by enabling the filling of a channel that has been cut, formed, or otherwise created in a metal structure or between two metal structures.
The aircraft industry requires robust methods for joining metal sheets, structures, and assemblies together in wings, fuselages, and engines. Fusion-based welding methods cannot always be used because they create heat-affected zones, which reduce the mechanical performance of material around the w…
  • College: College of Engineering (COE)
  • Inventors: Dapino, Marcelo; Gingerich, Mark; Headings, Leon
  • Licensing Officer: Zinn, Ryan

Redox Relay Flow Batteries: hybrid systems for scalable, high-capacity batteries.
TS-050105 — This application relates generally to a novel redox relay flow batteries comprising redox-active solids configured to behave as storage materials and redox-active organic molecules configured to behave as energy shuttles.
The Need The growing global demand for electrical energy has increased research efforts towards the integration of renewable energy sources into the electrical grid. Generation of energy from petroleum-based sources dominates the current market, but dependence on renewable energy is expected to gro…
  • College: College of Arts & Sciences
  • Inventors: Sevov, Christo; Wong, Curt
  • Licensing Officer: Sita, Cordellia

Integrally Joined Stainless Steel-NiTi Medical Devices
TS-050057 — A method for manufacturing surgical tools and implants with strong, gapless joints between NiTi (Nitinol) and stainless steel to capitalize on the best properties of both materials.
NiTi (Nitinol) is widely accepted and used for medical devices such as surgical tools and implants due to its biocompatibility and unique thermal-mechanical properties which provide super-elastic or shape memory responses. However, there are currently no commercial solutions for joining of NiTi to…
  • College: College of Engineering (COE)
  • Inventors: Panton, Boyd; Dapino, Marcelo; Gingerich, Mark; Headings, Leon; Morris, Jennifer
  • Licensing Officer: Zinn, Ryan

Dielectric heterojunction device
TS-048644 — The potential of different materials for vertical power switching is often assessed by calculating the Baliga Figure of Merit (BFOM). In the case of wide and ultra-wide bandgap materials, the high breakdown fields and the relatively good transport properties make the BFOM significantly higher than…
  • College: College of Engineering (COE)
  • Inventors: Rajan, Siddharth; Moore, Wyatt; Xia, Zhanbo
  • Licensing Officer: Hong, Dongsung

Capacitive Sensing Method for Integrated Circuit Identification and Authentication
TS-048641 — A method of authenticating an IC die’s origin and uniquely identifying each die with an intrinsic unclonable value through measurement of on-chip capacitance values
Hardware security in Integrated Circuit (IC) designs is of increasing importance in dealing with the insecure, expanding global supply chain of these parts. The ability to trace the origin of a die, combined with the capability to uniquely identify each die provides valuable quantitative measures …
  • College: College of Engineering (COE)
  • Inventors: Khalil, Waleed; Kines, Michael
  • Licensing Officer: Hong, Dongsung

A proximity sensor for the detection of hands on a steering wheel
TS-048591 — An embedded coax proximity sensor for the detection of hands or other objects near a vehicle's steering wheel
The coming age of autonomous vehicles will require the development of many new technologies to keep the vehicle occupants safe even when no one is paying attention to the vehicle operation. At present, given the limited capabilities of autonomous vehicles, it is necessary for the driver to monitor…
  • College: College of Engineering (COE)
  • Inventors: Lee, Robert; Kiourti, Asimina; Wang, Zhenyu
  • Licensing Officer: Hong, Dongsung

A Lightweight Low Inductance Power Module with Insulated Baseplates
TS-048588 — A lightweight power module that reduces loop stray inductance while maintaining good electrical insulation and thermal dissipation.
In conventional power module structures, the die is attached to the substrate, usually direct bonding copper (DBC). The ceramic substrate layer provides electrical insulation between the circuit and cooling structure and attaches to a conductive baseplate material (Cu, Al, AlSiC) to dissipate heat…
  • College: College of Engineering (COE)
  • Inventors: Lyu, Xintong; Wang, Jin
  • Licensing Officer: Hong, Dongsung

A Novel Variable Stiffness Robotic Gripper Based on Layer Jamming
TS-048216 — A soft robotic gripper design which incorporates layer jamming as a means for creating tunable stiffness control and higher load capacities.
Automation using robotics has taken many forms including, but not limited to, automotive manufacturing, transportation of good in shipping warehouses, and the delicate handling of wafers in semiconductor plants. In many of these applications grippers and end-of-arm-tools (EOAT’s) are incorpo…
  • College: College of Engineering (COE)
  • Inventors: Su, Haijun; Gao, Yuan
  • Licensing Officer: Zinn, Ryan

Show More Technologies

Loading icon